Re: [PATCH v1 1/2] dt-bindings: dsp: mediatek: Add default clock sources for mt8186 dsp

On Wed, 2022-11-02 at 10:13 +0100, AngeloGioacchino Del Regno wrote:

Il 01/11/22 07:11, Tinghan Shen ha scritto:

...

Add the default clock sources used by mt8186 dsp.

Signed-off-by: Tinghan Shen tinghan.shen@mediatek.com

.../devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml

b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml

...

index 3e63f79890b4..4cc0634c876b 100644 --- a/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml +++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml @@ -35,11 +35,15 @@ properties: items: - description: mux for audio dsp clock - description: mux for audio dsp local bus

•  - description: default clock source for dsp local bus
  

•  - description: default clock source for dsp core
  
  

  clock-names: items: - const: audiodsp - const: adsp_bus

•  - const: mainpll_d2_d2
  

•  - const: clk26m
  
  

  power-domains: maxItems: 1

@@ -82,9 +86,11 @@ examples: <0x1068f000 0x1000>; reg-names = "cfg", "sram", "sec", "bus"; clocks = <&topckgen CLK_TOP_AUDIODSP>,

•             <&topckgen CLK_TOP_ADSP_BUS>;
  

•    clock-names = "audiodsp",
  

•                  "adsp_bus";
  

•             <&topckgen CLK_TOP_ADSP_BUS>,
  

•             <&topckgen CLK_TOP_MAINPLL_D2_D2>,
  

•             <&clk26m>;
  

•    clock-names = "audiodsp", "adsp_bus",
  

•                  "mainpll_d2_d2", "clk26m";
  

You are assigning those clocks just to be able to call clk_set_parent() in the DSP mt8186-clk driver... and that's not necessary, nor it is the best way of doing what you're trying to.

In reality, you don't need to add new clocks and you don't need to manage that into the driver, as you can simply assign clock parents in devicetree ... like:

assigned-clocks = <&topckgen CLK_TOP_AUDIODSP>, <&topckgen CLK_TOP_ADSP_BUS>; assigned-clock-parents = <&clk26m>, <&topckgen CLK_TOP_MAINPLL_D2_D2>;

without any clk_set_parent() call in the driver.

When the driver will call clk_prepare_enable() for top_audiodsp and/or for top_adsp_bus, the assigned parents' refcount will also be increased (and if the parent clock is not enabled, the clk framework will enable it).

Regards, Angelo

Hi Angelo,

Thank you very much!

I will abandon this series. Thank you!

-- Best regards, TingHan

************* MEDIATEK Confidentiality Notice ******************** The information contained in this e-mail message (including any attachments) may be confidential, proprietary, privileged, or otherwise exempt from disclosure under applicable laws. It is intended to be conveyed only to the designated recipient(s). Any use, dissemination, distribution, printing, retaining or copying of this e-mail (including its attachments) by unintended recipient(s) is strictly prohibited and may be unlawful. If you are not an intended recipient of this e-mail, or believe that you have received this e-mail in error, please notify the sender immediately (by replying to this e-mail), delete any and all copies of this e-mail (including any attachments) from your system, and do not disclose the content of this e-mail to any other person. Thank you!