Am Donnerstag, 14. Oktober 2010, 17:39:13 schrieb Daniel Mack:
Well, even if it was, you should hear some sound. It might be distorted, but if you don't get any output, the reason is somewhere else.
Did you check the schematics of your board in comparison to the reference diagrams in the codec's datasheet? Are there any other things to be considered maybe?
What about the voltage levels? Are they within the specs? I had a quick look and it seems that Vdd on the codec has to be within 3.0 .. 3.6V, while the signals you provide rather seem to be in the range of 5V? The absolute maximum ratings say that Vdd must not be greater than 4.0V.
Sorry for one more off-topic mail, but I rechecked it. Digital Input Voltage is -0.3V to 6.5V, so my 5V clock voltage should be fine imho. Vdd is 3.0V on my board... Do you maybe have any other thoughts what might be wrong here?
-Julian