From: Chen-Yu Tsai wens@csie.org
Commit 44f362c2cc6d ("ASoC: rockchip: i2s: switch BCLK to GPIO") added pinctrl lookups, but did not skip the lookup if there was no pinctrl device tied to the I2S controller. As a result, the lookup was done on an invalid pointer in such cases, causing a kernel panic.
Only do the subsequent pinctrl state lookups and switch if a pinctrl device was found.
i2s_pinctrl_select_bclk_{on,off} already guard against missing pinctrl device or pinctrl state, so those two functions aren't touched.
Fixes: 44f362c2cc6d ("ASoC: rockchip: i2s: switch BCLK to GPIO") Signed-off-by: Chen-Yu Tsai wens@csie.org ---
This is based on next-20220621, which just saw the inclusion of the commit this patch fixes.
This issue was found and tested on ROC-RK3328-CC. Tried to test on RK3399, but that has some other DRM driver related crash.
sound/soc/rockchip/rockchip_i2s.c | 29 ++++++++++++++--------------- 1 file changed, 14 insertions(+), 15 deletions(-)
diff --git a/sound/soc/rockchip/rockchip_i2s.c b/sound/soc/rockchip/rockchip_i2s.c index be051e48b97b..9fa8ffd712ea 100644 --- a/sound/soc/rockchip/rockchip_i2s.c +++ b/sound/soc/rockchip/rockchip_i2s.c @@ -808,24 +808,23 @@ static int rockchip_i2s_probe(struct platform_device *pdev)
i2s->bclk_ratio = 64; i2s->pinctrl = devm_pinctrl_get(&pdev->dev); - if (IS_ERR(i2s->pinctrl)) + if (IS_ERR(i2s->pinctrl)) { dev_err(&pdev->dev, "failed to find i2s pinctrl\n"); + } else { + i2s->bclk_on = pinctrl_lookup_state(i2s->pinctrl, "bclk_on"); + if (IS_ERR_OR_NULL(i2s->bclk_on)) + dev_err(&pdev->dev, "failed to find i2s default state\n"); + else + dev_dbg(&pdev->dev, "find i2s bclk state\n");
- i2s->bclk_on = pinctrl_lookup_state(i2s->pinctrl, - "bclk_on"); - if (IS_ERR_OR_NULL(i2s->bclk_on)) - dev_err(&pdev->dev, "failed to find i2s default state\n"); - else - dev_dbg(&pdev->dev, "find i2s bclk state\n"); - - i2s->bclk_off = pinctrl_lookup_state(i2s->pinctrl, - "bclk_off"); - if (IS_ERR_OR_NULL(i2s->bclk_off)) - dev_err(&pdev->dev, "failed to find i2s gpio state\n"); - else - dev_dbg(&pdev->dev, "find i2s bclk_off state\n"); + i2s->bclk_off = pinctrl_lookup_state(i2s->pinctrl, "bclk_off"); + if (IS_ERR_OR_NULL(i2s->bclk_off)) + dev_err(&pdev->dev, "failed to find i2s gpio state\n"); + else + dev_dbg(&pdev->dev, "find i2s bclk_off state\n");
- i2s_pinctrl_select_bclk_off(i2s); + i2s_pinctrl_select_bclk_off(i2s); + }
i2s->playback_dma_data.addr = res->start + I2S_TXDR; i2s->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;