Allow the jz4740 audio drivers to be build when CONFIG_COMPILE_TEST is selected. This should improve the build test coverage. There is one small piece of platform dependent code in the jz4740-i2s driver. It uses the DMA request type constants which are defined in a platform specific header. We can solve this by moving them from the platform specific header to the I2S driver.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- Preferably this should go through the ASoC tree, but needs an Ack from Ralf for the MIPS portions. --- arch/mips/include/asm/mach-jz4740/dma.h | 2 -- sound/soc/jz4740/Kconfig | 11 ++++++++--- sound/soc/jz4740/jz4740-i2s.c | 5 +++-- 3 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/arch/mips/include/asm/mach-jz4740/dma.h b/arch/mips/include/asm/mach-jz4740/dma.h index 509cd58..14ecc53 100644 --- a/arch/mips/include/asm/mach-jz4740/dma.h +++ b/arch/mips/include/asm/mach-jz4740/dma.h @@ -22,8 +22,6 @@ enum jz4740_dma_request_type { JZ4740_DMA_TYPE_UART_RECEIVE = 21, JZ4740_DMA_TYPE_SPI_TRANSMIT = 22, JZ4740_DMA_TYPE_SPI_RECEIVE = 23, - JZ4740_DMA_TYPE_AIC_TRANSMIT = 24, - JZ4740_DMA_TYPE_AIC_RECEIVE = 25, JZ4740_DMA_TYPE_MMC_TRANSMIT = 26, JZ4740_DMA_TYPE_MMC_RECEIVE = 27, JZ4740_DMA_TYPE_TCU = 28, diff --git a/sound/soc/jz4740/Kconfig b/sound/soc/jz4740/Kconfig index 29f76af..1a354a6 100644 --- a/sound/soc/jz4740/Kconfig +++ b/sound/soc/jz4740/Kconfig @@ -1,24 +1,29 @@ config SND_JZ4740_SOC tristate "SoC Audio for Ingenic JZ4740 SoC" - depends on MACH_JZ4740 && SND_SOC + depends on MACH_JZ4740 || COMPILE_TEST select SND_SOC_GENERIC_DMAENGINE_PCM help Say Y or M if you want to add support for codecs attached to the JZ4740 I2S interface. You will also need to select the audio interfaces to support below.
+if SND_JZ4740_SOC + config SND_JZ4740_SOC_I2S - depends on SND_JZ4740_SOC tristate "SoC Audio (I2S protocol) for Ingenic JZ4740 SoC" + depends on HAS_IOMEM help Say Y if you want to use I2S protocol and I2S codec on Ingenic JZ4740 based boards.
config SND_JZ4740_SOC_QI_LB60 tristate "SoC Audio support for Qi LB60" - depends on SND_JZ4740_SOC && JZ4740_QI_LB60 + depends on HAS_IOMEM + depends on JZ4740_QI_LB60 || COMPILE_TEST select SND_JZ4740_SOC_I2S select SND_SOC_JZ4740_CODEC help Say Y if you want to add support for ASoC audio on the Qi LB60 board a.k.a Qi Ben NanoNote. + +endif diff --git a/sound/soc/jz4740/jz4740-i2s.c b/sound/soc/jz4740/jz4740-i2s.c index 8f22000..3f9c3a9 100644 --- a/sound/soc/jz4740/jz4740-i2s.c +++ b/sound/soc/jz4740/jz4740-i2s.c @@ -31,10 +31,11 @@ #include <sound/initval.h> #include <sound/dmaengine_pcm.h>
-#include <asm/mach-jz4740/dma.h> - #include "jz4740-i2s.h"
+#define JZ4740_DMA_TYPE_AIC_TRANSMIT 24 +#define JZ4740_DMA_TYPE_AIC_RECEIVE 25 + #define JZ_REG_AIC_CONF 0x00 #define JZ_REG_AIC_CTRL 0x04 #define JZ_REG_AIC_I2S_FMT 0x10