This patch adds generic ac97 reset functions using pincontrol and gpio parsed from devicetree.
Signed-off-by: Markus Pargmann mpa@pengutronix.de --- .../devicetree/bindings/sound/soc-ac97link.txt | 28 ++++ include/sound/soc.h | 2 + sound/soc/soc-core.c | 153 +++++++++++++++++++++ 3 files changed, 183 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/soc-ac97link.txt
diff --git a/Documentation/devicetree/bindings/sound/soc-ac97link.txt b/Documentation/devicetree/bindings/sound/soc-ac97link.txt new file mode 100644 index 0000000..80152a8 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/soc-ac97link.txt @@ -0,0 +1,28 @@ +AC97 link bindings + +These bindings can be included within any other device node. + +Required properties: + - pinctrl-names: Has to contain following states to setup the correct + pinmuxing for the used gpios: + "ac97-running": AC97-link is active + "ac97-reset": AC97-link reset state + "ac97-warm-reset": AC97-link warm reset state + - ac97-gpios: List of gpio phandles with args in the order ac97-sync, + ac97-sdata, ac97-reset + + +Example: + +ssi { + ... + + pinctrl-names = "default", "ac97-running", "ac97-reset", "ac97-warm-reset"; + pinctrl-0 = <&ac97link_running>; + pinctrl-1 = <&ac97link_running>; + pinctrl-2 = <&ac97link_reset>; + pinctrl-3 = <&ac97link_warm_reset>; + ac97-gpios = <&gpio3 20 0 &gpio3 22 0 &gpio3 28 0>; + + ... +}; diff --git a/include/sound/soc.h b/include/sound/soc.h index 6eabee7..c0ac3bc 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -468,6 +468,8 @@ int snd_soc_new_ac97_codec(struct snd_soc_codec *codec, void snd_soc_free_ac97_codec(struct snd_soc_codec *codec);
int snd_soc_set_ac97_ops(struct snd_ac97_bus_ops *ops); +int snd_soc_set_ac97_ops_of_reset(struct snd_ac97_bus_ops *ops, + struct platform_device *pdev);
/* *Controls diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 0ec070c..6010932 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -30,9 +30,12 @@ #include <linux/bitops.h> #include <linux/debugfs.h> #include <linux/platform_device.h> +#include <linux/pinctrl/consumer.h> #include <linux/ctype.h> #include <linux/slab.h> #include <linux/of.h> +#include <linux/gpio.h> +#include <linux/of_gpio.h> #include <sound/ac97_codec.h> #include <sound/core.h> #include <sound/jack.h> @@ -69,6 +72,16 @@ static int pmdown_time = 5000; module_param(pmdown_time, int, 0); MODULE_PARM_DESC(pmdown_time, "DAPM stream powerdown time (msecs)");
+struct snd_ac97_reset_cfg { + struct pinctrl *pctl; + struct pinctrl_state *pstate_reset; + struct pinctrl_state *pstate_warm_reset; + struct pinctrl_state *pstate_run; + int gpio_sdata; + int gpio_sync; + int gpio_reset; +}; + /* returns the minimum number of bytes needed to represent * a particular given value */ static int min_bytes_needed(unsigned long val) @@ -2080,6 +2093,117 @@ int snd_soc_new_ac97_codec(struct snd_soc_codec *codec, } EXPORT_SYMBOL_GPL(snd_soc_new_ac97_codec);
+static struct snd_ac97_reset_cfg snd_ac97_rst_cfg; + +static void snd_soc_ac97_warm_reset(struct snd_ac97 *ac97) +{ + struct pinctrl *pctl = snd_ac97_rst_cfg.pctl; + + pinctrl_select_state(pctl, snd_ac97_rst_cfg.pstate_warm_reset); + + gpio_direction_output(snd_ac97_rst_cfg.gpio_sync, 1); + + udelay(10); + + gpio_direction_output(snd_ac97_rst_cfg.gpio_sync, 0); + + pinctrl_select_state(pctl, snd_ac97_rst_cfg.pstate_run); + msleep(2); +} + +static void snd_soc_ac97_reset(struct snd_ac97 *ac97) +{ + struct pinctrl *pctl = snd_ac97_rst_cfg.pctl; + + pinctrl_select_state(pctl, snd_ac97_rst_cfg.pstate_reset); + + gpio_direction_output(snd_ac97_rst_cfg.gpio_sync, 0); + gpio_direction_output(snd_ac97_rst_cfg.gpio_sdata, 0); + gpio_direction_output(snd_ac97_rst_cfg.gpio_reset, 0); + + udelay(10); + + gpio_direction_output(snd_ac97_rst_cfg.gpio_reset, 1); + + pinctrl_select_state(pctl, snd_ac97_rst_cfg.pstate_run); + msleep(2); +} + +static int snd_soc_ac97_parse_pinctl(struct device *dev, + struct snd_ac97_reset_cfg *cfg) +{ + struct pinctrl *p; + struct pinctrl_state *state; + int gpio; + int ret; + + p = devm_pinctrl_get(dev); + if (IS_ERR(p)) { + dev_err(dev, "Failed to get pinctrl\n"); + return PTR_RET(p); + } + cfg->pctl = p; + + state = pinctrl_lookup_state(p, "ac97-reset"); + if (IS_ERR(state)) { + dev_err(dev, "Can't find pinctrl state ac97-reset\n"); + return PTR_RET(state); + } + cfg->pstate_reset = state; + + state = pinctrl_lookup_state(p, "ac97-warm-reset"); + if (IS_ERR(state)) { + dev_err(dev, "Can't find pinctrl state ac97-warm-reset\n"); + return PTR_RET(state); + } + cfg->pstate_warm_reset = state; + + state = pinctrl_lookup_state(p, "ac97-running"); + if (IS_ERR(state)) { + dev_err(dev, "Can't find pinctrl state ac97-running\n"); + return PTR_RET(state); + } + cfg->pstate_run = state; + + gpio = of_get_named_gpio(dev->of_node, "ac97-gpios", 0); + if (gpio < 0) { + dev_err(dev, "Can't find ac97-sync gpio\n"); + return gpio; + } + ret = devm_gpio_request(dev, gpio, "AC97 link sync"); + if (ret) { + dev_err(dev, "Failed requesting ac97-sync gpio\n"); + return ret; + } + cfg->gpio_sync = gpio; + + gpio = of_get_named_gpio(dev->of_node, "ac97-gpios", 1); + if (gpio < 0) { + dev_err(dev, "Can't find ac97-sdata gpio %d\n", gpio); + return gpio; + } + ret = devm_gpio_request(dev, gpio, "AC97 link sdata"); + if (ret) { + dev_err(dev, "Failed requesting ac97-sdata gpio\n"); + return ret; + } + cfg->gpio_sdata = gpio; + + gpio = of_get_named_gpio(dev->of_node, "ac97-gpios", 2); + if (gpio < 0) { + dev_err(dev, "Can't find ac97-reset gpio\n"); + return gpio; + } + ret = devm_gpio_request(dev, gpio, "AC97 link reset"); + if (ret) { + dev_err(dev, "Failed requesting ac97-reset gpio\n"); + return ret; + } + cfg->gpio_reset = gpio; + + return 0; +} + struct snd_ac97_bus_ops *soc_ac97_ops; EXPORT_SYMBOL_GPL(soc_ac97_ops);
@@ -2098,6 +2222,35 @@ int snd_soc_set_ac97_ops(struct snd_ac97_bus_ops *ops) EXPORT_SYMBOL_GPL(snd_soc_set_ac97_ops);
/** + * snd_soc_set_ac97_ops_of_reset - Set ac97 ops with generic ac97 reset functions + * + * This function sets the reset and warm_reset properties of ops and parses + * the device node of pdev to get pinctrl states and gpio numbers to use. + */ +int snd_soc_set_ac97_ops_of_reset(struct snd_ac97_bus_ops *ops, + struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct snd_ac97_reset_cfg cfg; + int ret; + + ret = snd_soc_ac97_parse_pinctl(dev, &cfg); + if (ret) + return ret; + + ret = snd_soc_set_ac97_ops(ops); + if (ret) + return ret; + + ops->warm_reset = snd_soc_ac97_warm_reset; + ops->reset = snd_soc_ac97_reset; + + snd_ac97_rst_cfg = cfg; + return 0; +} +EXPORT_SYMBOL_GPL(snd_soc_set_ac97_ops_of_reset); + +/** * snd_soc_free_ac97_codec - free AC97 codec device * @codec: audio codec *