Board sdp3430 has hardware support for EXTMUTE using TWL4030 GPIO6 line, controlled by register INTBR_PMBR1. Machine driver takes care of enabling gpio line through i2c and codec driver manipulates the line during headset ramp up/down sequence.
Signed-off-by: Jorge Eduardo Candelaria x0107209@ti.com --- sound/soc/omap/sdp3430.c | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c index c51594d..f7e5b74 100644 --- a/sound/soc/omap/sdp3430.c +++ b/sound/soc/omap/sdp3430.c @@ -24,6 +24,7 @@
#include <linux/clk.h> #include <linux/platform_device.h> +#include <linux/i2c/twl4030.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/soc.h> @@ -39,6 +40,9 @@ #include "omap-pcm.h" #include "../codecs/twl4030.h"
+#define TWL4030_INTBR_PMBR1 0x0D +#define EXTMUTE(value) (value << 2) + static struct snd_soc_card snd_soc_sdp3430;
static int sdp3430_hw_params(struct snd_pcm_substream *substream, @@ -280,6 +284,7 @@ static struct snd_soc_card snd_soc_sdp3430 = { static struct twl4030_setup_data twl4030_setup = { .ramp_delay_value = 3, .sysclk = 26000, + .hs_extmute = 1, };
/* Audio subsystem */ @@ -312,6 +317,10 @@ static int __init sdp3430_soc_init(void) *(unsigned int *)sdp3430_dai[0].cpu_dai->private_data = 1; /* McBSP2 */ *(unsigned int *)sdp3430_dai[1].cpu_dai->private_data = 2; /* McBSP3 */
+ /* Set TWL4030 GPIO6 as EXTMUTE signal */ + twl4030_i2c_write_u8(TWL4030_MODULE_INTBR, EXTMUTE(0x02), + TWL4030_MODULE_INTBR); + ret = platform_device_add(sdp3430_snd_device); if (ret) goto err1;