Use correct polarity in example and powerdown-gpios description.
Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
---
Changes since v1: 1. New patch. --- Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml index 6113f65f2990..99f9c10bbc83 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml @@ -23,7 +23,7 @@ properties: maxItems: 1
powerdown-gpios: - description: GPIO spec for Powerdown/Shutdown line to use + description: GPIO spec for Powerdown/Shutdown line to use (pin SD_N) maxItems: 1
vdd-supply: @@ -47,6 +47,8 @@ additionalProperties: false
examples: - | + #include <dt-bindings/gpio/gpio.h> + soundwire-controller@3250000 { #address-cells = <2>; #size-cells = <0>; @@ -55,7 +57,7 @@ examples: speaker@0,1 { compatible = "sdw10217020200"; reg = <0 1>; - powerdown-gpios = <&tlmm 1 0>; + powerdown-gpios = <&tlmm 1 GPIO_ACTIVE_LOW>; vdd-supply = <&vreg_s10b_1p8>; #thermal-sensor-cells = <0>; #sound-dai-cells = <0>; @@ -64,7 +66,7 @@ examples: speaker@0,2 { compatible = "sdw10217020200"; reg = <0 2>; - powerdown-gpios = <&tlmm 89 0>; + powerdown-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; vdd-supply = <&vreg_s10b_1p8>; #thermal-sensor-cells = <0>; #sound-dai-cells = <0>;