W dniu 30.06.2011 21:28, Takashi Iwai pisze:
At Thu, 30 Jun 2011 20:09:49 +0200, Julian Sikorski wrote:
$ dmesg | grep XXX [ 14.813013] XXX alc662_auto_fill_dac_nids called [ 14.813015] XXX line_outs=1, 14/0/0 [ 14.813016] XXX hp_outs=1, 1b/0/0 [ 14.813018] XXX spk_outs=0, 0/0/0 [ 14.813186] XXX filled dacs: 2/0/0/0/0, hp 0, ext 0/0/0 [ 14.813187] XXX swap primary out to HP [ 14.813188] XXX spk=14 [ 14.813190] XXX line=1b [ 14.813191] XXX alc662_auto_fill_dac_nids called [ 14.813192] XXX line_outs=1, 1b/0/0 [ 14.813194] XXX hp_outs=0, 0/0/0 [ 14.813195] XXX spk_outs=1, 14/0/0 [ 14.813311] XXX filled dacs: 2/0/0/0/0, hp 0, ext 0/0/0 [ 14.813560] XXX added multi-io pin 1a, dac 3 [ 14.813814] XXX added multi-io pin 18, dac 4 [ 14.813818] XXX create mixer ch 0 pin 1b dac 2 mix c [ 14.813821] XXX create mixer ch 1 pin 1a dac 3 mix d [ 14.813825] XXX create mixer ch 2 pin 18 dac 4 mix e
How about the fix below?
Takashi
It works, thanks! In more detail, the Speaker/Headphone situation is back to 2.6.38 state - you can regulate them independently, but muting one mutes the other. LFE/Center and Surround keep working correctly too. The new output of alsa-info.sh: http://www.alsa-project.org/db/?f=45bc0df9747371b348bde6c4aa508b2ba44aff47
$ dmesg | grep XXX [ 13.944531] XXX alc662_auto_fill_dac_nids called [ 13.944533] XXX line_outs=1, 14/0/0 [ 13.944534] XXX hp_outs=1, 1b/0/0 [ 13.944536] XXX spk_outs=0, 0/0/0 [ 13.944631] XXX check single for pin 14, sel 14 [ 13.944632] XXX pin 14 coupled with a single DAC [ 13.944843] XXX check single for pin 1b, sel 1b [ 13.944845] XXX filled dacs: 2/0/0/0/0, hp 0, ext 0/0/0 [ 13.944847] XXX swap primary out to HP [ 13.944848] XXX spk=14 [ 13.944849] XXX line=1b [ 13.944850] XXX alc662_auto_fill_dac_nids called [ 13.944852] XXX line_outs=1, 1b/0/0 [ 13.944853] XXX hp_outs=0, 0/0/0 [ 13.944855] XXX spk_outs=1, 14/0/0 [ 13.944856] XXX check single for pin 1b, sel 1b [ 13.944858] XXX check single for pin 14, sel 14 [ 13.944859] XXX pin 14 coupled with a single DAC [ 13.944945] XXX filled dacs: 3/0/0/0/0, hp 0, ext 2/0/0 [ 13.945189] XXX added multi-io pin 1a, dac 4 [ 13.945440] XXX added multi-io pin 18, dac 5 [ 13.945446] XXX create mixer ch 0 pin 1b dac 3 mix d [ 13.945452] XXX create mixer ch 1 pin 1a dac 4 mix e [ 13.945457] XXX create mixer ch 2 pin 18 dac 5 mix f
So it seems that the only things remaining are the SPDIF/rear channel jack and the coupled muting issue. Thanks for all the help so far,
Julian