The patch
ASoC: samsung: i2s: Ensure the RCLK rate is properly determined
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 647d04f8e07afc7c3b7a42b3ee01a8b28db29631 Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki s.nawrocki@samsung.com Date: Mon, 5 Feb 2018 16:43:56 +0100 Subject: [PATCH] ASoC: samsung: i2s: Ensure the RCLK rate is properly determined
If the RCLK mux clock configuration is specified in DT and no set_sysclk() callback is used in the sound card driver the sclk_srcrate field will remain set to 0, leading to an incorrect PSR divider setting. To fix this the frequency value is retrieved from the CLK_I2S_RCLK_SRC clock, so the actual RCLK mux selection is taken into account.
Signed-off-by: Sylwester Nawrocki s.nawrocki@samsung.com Acked-by: Krzysztof Kozlowski krzk@kernel.org Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/samsung/i2s.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c index 233f1c9a4b6c..aeba0ae890ea 100644 --- a/sound/soc/samsung/i2s.c +++ b/sound/soc/samsung/i2s.c @@ -656,8 +656,12 @@ static int i2s_set_fmt(struct snd_soc_dai *dai, tmp |= mod_slave; break; case SND_SOC_DAIFMT_CBS_CFS: - /* Set default source clock in Master mode */ - if (i2s->rclk_srcrate == 0) + /* + * Set default source clock in Master mode, only when the + * CLK_I2S_RCLK_SRC clock is not exposed so we ensure any + * clock configuration assigned in DT is not overwritten. + */ + if (i2s->rclk_srcrate == 0 && i2s->clk_data.clks == NULL) i2s_set_sysclk(dai, SAMSUNG_I2S_RCLKSRC_0, 0, SND_SOC_CLOCK_IN); break; @@ -881,6 +885,11 @@ static int config_setup(struct i2s_dai *i2s) return 0;
if (!(i2s->quirks & QUIRK_NO_MUXPSR)) { + struct clk *rclksrc = i2s->clk_table[CLK_I2S_RCLK_SRC]; + + if (i2s->rclk_srcrate == 0 && rclksrc && !IS_ERR(rclksrc)) + i2s->rclk_srcrate = clk_get_rate(rclksrc); + psr = i2s->rclk_srcrate / i2s->frmclk / rfs; writel(((psr - 1) << 8) | PSR_PSREN, i2s->addr + I2SPSR); dev_dbg(&i2s->pdev->dev,