The "Speaker Digital Gain" kcontrol controls the TAS2781_DVC_LVL (0x1A) register. Unfortunately the tas2563 does not have DVC_LVL, but has INT_MASK0 in 0x1A, which has been misused so far.
Since commit c1947ce61ff4 ("ALSA: hda/realtek: tas2781: enable subwoofer volume control") the volume of the tas2781 amplifiers can be controlled by the master volume, so this digital gain kcontrol is not needed.
Remove it.
Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver") CC: stable@vger.kernel.org Signed-off-by: Gergo Koteles soyer@irl.hu --- sound/pci/hda/tas2781_hda_i2c.c | 37 +-------------------------------- 1 file changed, 1 insertion(+), 36 deletions(-)
diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index 4475cea8e9f7..5acb475c10a7 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -89,7 +89,7 @@ struct tas2781_hda { struct snd_kcontrol *dsp_prog_ctl; struct snd_kcontrol *dsp_conf_ctl; struct snd_kcontrol *prof_ctl; - struct snd_kcontrol *snd_ctls[3]; + struct snd_kcontrol *snd_ctls[2]; };
static int tas2781_get_i2c_res(struct acpi_resource *ares, void *data) @@ -294,27 +294,6 @@ static int tasdevice_config_put(struct snd_kcontrol *kcontrol, return ret; }
-/* - * tas2781_digital_getvol - get the volum control - * @kcontrol: control pointer - * @ucontrol: User data - * Customer Kcontrol for tas2781 is primarily for regmap booking, paging - * depends on internal regmap mechanism. - * tas2781 contains book and page two-level register map, especially - * book switching will set the register BXXP00R7F, after switching to the - * correct book, then leverage the mechanism for paging to access the - * register. - */ -static int tas2781_digital_getvol(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); - struct soc_mixer_control *mc = - (struct soc_mixer_control *)kcontrol->private_value; - - return tasdevice_digital_getvol(tas_priv, ucontrol, mc); -} - static int tas2781_amp_getvol(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -325,17 +304,6 @@ static int tas2781_amp_getvol(struct snd_kcontrol *kcontrol, return tasdevice_amp_getvol(tas_priv, ucontrol, mc); }
-static int tas2781_digital_putvol(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); - struct soc_mixer_control *mc = - (struct soc_mixer_control *)kcontrol->private_value; - - /* The check of the given value is in tasdevice_digital_putvol. */ - return tasdevice_digital_putvol(tas_priv, ucontrol, mc); -} - static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -381,9 +349,6 @@ static const struct snd_kcontrol_new tas2781_snd_controls[] = { ACARD_SINGLE_RANGE_EXT_TLV("Speaker Analog Gain", TAS2781_AMP_LEVEL, 1, 0, 20, 0, tas2781_amp_getvol, tas2781_amp_putvol, amp_vol_tlv), - ACARD_SINGLE_RANGE_EXT_TLV("Speaker Digital Gain", TAS2781_DVC_LVL, - 0, 0, 200, 1, tas2781_digital_getvol, - tas2781_digital_putvol, dvc_tlv), ACARD_SINGLE_BOOL_EXT("Speaker Force Firmware Load", 0, tas2781_force_fwload_get, tas2781_force_fwload_put), };