From: Cliff Cai cliff.cai@analog.com
[Additional coding standards fixes by Mark Brown.]
Signed-off-by: Cliff Cai cliff.cai@analog.com Signed-off-by: Bryan Wu cooloney@kernel.org Signed-off-by: Mark Brown broonie@opensource.wolfsonmicro.com --- sound/soc/blackfin/bf5xx-i2s.c | 292 ++++++++++++++++++++++++++++++++++++++++ sound/soc/blackfin/bf5xx-i2s.h | 14 ++ 2 files changed, 306 insertions(+), 0 deletions(-) create mode 100644 sound/soc/blackfin/bf5xx-i2s.c create mode 100644 sound/soc/blackfin/bf5xx-i2s.h
diff --git a/sound/soc/blackfin/bf5xx-i2s.c b/sound/soc/blackfin/bf5xx-i2s.c new file mode 100644 index 0000000..43a4092 --- /dev/null +++ b/sound/soc/blackfin/bf5xx-i2s.c @@ -0,0 +1,292 @@ +/* + * File: sound/soc/blackfin/bf5xx-i2s.c + * Author: Cliff Cai Cliff.Cai@analog.com + * + * Created: Tue June 06 2008 + * Description: Blackfin I2S CPU DAI driver + * + * Modified: + * Copyright 2008 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/soc.h> + +#include <asm/irq.h> +#include <asm/portmux.h> +#include <linux/mutex.h> +#include <linux/gpio.h> + +#include "bf5xx-sport.h" +#include "bf5xx-i2s.h" + +struct bf5xx_i2s_port { + u16 tcr1; + u16 rcr1; + u16 tcr2; + u16 rcr2; + int counter; +}; + +static struct bf5xx_i2s_port bf5xx_i2s; +static int sport_num = CONFIG_SND_BF5XX_SPORT_NUM; + +static struct sport_param sport_params[2] = { + { + .dma_rx_chan = CH_SPORT0_RX, + .dma_tx_chan = CH_SPORT0_TX, + .err_irq = IRQ_SPORT0_ERROR, + .regs = (struct sport_register *)SPORT0_TCR1, + }, + { + .dma_rx_chan = CH_SPORT1_RX, + .dma_tx_chan = CH_SPORT1_TX, + .err_irq = IRQ_SPORT1_ERROR, + .regs = (struct sport_register *)SPORT1_TCR1, + } +}; + +static int bf5xx_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai, + unsigned int fmt) +{ + int ret = 0; + + /* interface format:support I2S,slave mode */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + break; + case SND_SOC_DAIFMT_LEFT_J: + ret = -EINVAL; + break; + default: + ret = -EINVAL; + break; + } + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + ret = -EINVAL; + break; + case SND_SOC_DAIFMT_CBM_CFS: + ret = -EINVAL; + break; + case SND_SOC_DAIFMT_CBM_CFM: + break; + case SND_SOC_DAIFMT_CBS_CFM: + ret = -EINVAL; + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int bf5xx_i2s_startup(struct snd_pcm_substream *substream) +{ + pr_debug("%s enter\n", __func__); + + /*this counter is used for counting how many pcm streams are opened*/ + bf5xx_i2s.counter++; + return 0; +} + +static int bf5xx_i2s_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + int ret = 0; + + bf5xx_i2s.tcr2 &= ~0x1f; + bf5xx_i2s.rcr2 &= ~0x1f; + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + bf5xx_i2s.tcr2 |= 15; + bf5xx_i2s.rcr2 |= 15; + break; + case SNDRV_PCM_FORMAT_S24_LE: + bf5xx_i2s.tcr2 |= 23; + bf5xx_i2s.rcr2 |= 23; + break; + case SNDRV_PCM_FORMAT_S32_LE: + bf5xx_i2s.tcr2 |= 31; + bf5xx_i2s.rcr2 |= 31; + break; + } + + if (bf5xx_i2s.counter == 1) { + /* + * TX and RX are not independent,they are enabled at the + * same time, even if only one side is running. So, we + * need to configure both of them at the time when the first + * stream is opened. + * + * CPU DAI format:I2S, slave mode. + */ + ret = sport_config_rx(sport_handle, RFSR | RCKFE, + RSFSE|bf5xx_i2s.rcr2, 0, 0); + if (ret) { + pr_err("SPORT is busy!\n"); + return -EBUSY; + } + + ret = sport_config_tx(sport_handle, TFSR | TCKFE, + TSFSE|bf5xx_i2s.tcr2, 0, 0); + if (ret) { + pr_err("SPORT is busy!\n"); + return -EBUSY; + } + } + + return 0; +} + +static void bf5xx_i2s_shutdown(struct snd_pcm_substream *substream) +{ + pr_debug("%s enter\n", __func__); + bf5xx_i2s.counter--; +} + +static int bf5xx_i2s_probe(struct platform_device *pdev, + struct snd_soc_dai *dai) +{ + u16 sport_req[][7] = { + { P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0}, + { P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0}, + }; + + pr_debug("%s enter\n", __func__); + if (peripheral_request_list(&sport_req[sport_num][0], "soc-audio")) { + pr_err("Requesting Peripherals failed\n"); + return -EFAULT; + } + + /* request DMA for SPORT */ + sport_handle = sport_init(&sport_params[sport_num], 4, \ + 2 * sizeof(u32), NULL); + if (!sport_handle) { + peripheral_free_list(&sport_req[sport_num][0]); + return -ENODEV; + } + + return 0; +} + +#ifdef CONFIG_PM +static int bf5xx_i2s_suspend(struct platform_device *dev, + struct snd_soc_dai *dai) +{ + struct sport_device *sport = + (struct sport_device *)dai->private_data; + + pr_debug("%s : sport %d\n", __func__, dai->id); + if (!dai->active) + return 0; + if (dai->capture.active) + sport_rx_stop(sport); + if (dai->playback.active) + sport_tx_stop(sport); + return 0; +} + +static int bf5xx_i2s_resume(struct platform_device *pdev, + struct snd_soc_dai *dai) +{ + int ret; + struct sport_device *sport = + (struct sport_device *)dai->private_data; + + pr_debug("%s : sport %d\n", __func__, dai->id); + if (!dai->active) + return 0; + + ret = sport_config_rx(sport_handle, RFSR | RCKFE, RSFSE|0x1f, 0, 0); + if (ret) { + pr_err("SPORT is busy!\n"); + return -EBUSY; + } + + ret = sport_config_tx(sport_handle, TFSR | TCKFE, TSFSE|0x1f, 0, 0); + if (ret) { + pr_err("SPORT is busy!\n"); + return -EBUSY; + } + + if (dai->capture.active) + sport_rx_start(sport); + if (dai->playback.active) + sport_tx_start(sport); + return 0; +} + +#else +#define bf5xx_i2s_suspend NULL +#define bf5xx_i2s_resume NULL +#endif + +#define BF5XX_I2S_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \ + SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | \ + SNDRV_PCM_RATE_96000) + +#define BF5XX_I2S_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE |\ + SNDRV_PCM_FMTBIT_S32_LE) + +struct snd_soc_dai bf5xx_i2s_dai = { + .name = "bf5xx-i2s", + .id = 0, + .type = SND_SOC_DAI_I2S, + .probe = bf5xx_i2s_probe, + .suspend = bf5xx_i2s_suspend, + .resume = bf5xx_i2s_resume, + .playback = { + .channels_min = 2, + .channels_max = 2, + .rates = BF5XX_I2S_RATES, + .formats = BF5XX_I2S_FORMATS,}, + .capture = { + .channels_min = 2, + .channels_max = 2, + .rates = BF5XX_I2S_RATES, + .formats = BF5XX_I2S_FORMATS,}, + .ops = { + .startup = bf5xx_i2s_startup, + .shutdown = bf5xx_i2s_shutdown, + .hw_params = bf5xx_i2s_hw_params,}, + .dai_ops = { + .set_fmt = bf5xx_i2s_set_dai_fmt, + }, +}; +EXPORT_SYMBOL_GPL(bf5xx_i2s_dai); + +/* Module information */ +MODULE_AUTHOR("Cliff Cai"); +MODULE_DESCRIPTION("I2S driver for ADI Blackfin"); +MODULE_LICENSE("GPL"); + diff --git a/sound/soc/blackfin/bf5xx-i2s.h b/sound/soc/blackfin/bf5xx-i2s.h new file mode 100644 index 0000000..7107d1a --- /dev/null +++ b/sound/soc/blackfin/bf5xx-i2s.h @@ -0,0 +1,14 @@ +/* + * linux/sound/arm/bf5xx-i2s.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _BF5XX_I2S_H +#define _BF5XX_I2S_H + +extern struct snd_soc_dai bf5xx_i2s_dai; + +#endif