From: "Keith A. Milner" maillist@superlative.org
This patch enables interrupt transfer mode for MIDI ports on newer Boss/Roland devices such as the GT-100/001 which support interrupt transfer on both IN and OUT MIDI endpoints. Previously this wasn't being enabled for these devices as the code was specifically looking for the scenario where the IN endpoint supported interrupt transfer and the OUT endpoint was bulk transfer. Newer devices support interrupt transfer for both endpoints.
This has been tested on Boss devices GT-001, BR-80 and JS-8 and Roland VS-20.
It would benefit from some regresison testing with other devices if possible.
Signed-off-by: Keith A. Milner maillist@superlative.org
diff --git a/sound/usb/midi.c b/sound/usb/midi.c index b901f46..d50c649 100644 --- a/sound/usb/midi.c +++ b/sound/usb/midi.c @@ -1860,9 +1860,14 @@ static void snd_usbmidi_switch_roland_altsetting(struct snd_usb_midi* umidi)
hostif = &intf->altsetting[1]; intfd = get_iface_desc(hostif); + /* If either or both of the endpoints support interrupt transfer, + * then use the alternate setting + */ if (intfd->bNumEndpoints != 2 || - (get_endpoint(hostif, 0)->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK || - (get_endpoint(hostif, 1)->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) + !((get_endpoint(hostif, 0)->bmAttributes + & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT || + (get_endpoint(hostif, 1)->bmAttributes + & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) return;
snd_printdd(KERN_INFO "switching to altsetting %d with int ep\n",