On Wed, Nov 24, 2010 at 11:05:11AM +1300, Ryan Mallon wrote:
The following patch is one that has been floating around in various forms in our own internal trees for a while.
The Atmel SSC peripheral has seperate TX and RX clocks which use separate pins from the the micro. TF (frame) and TK (clock) for transmit and RF and RK for receive. Not all codecs have separate frame and bit clocks for transmit and receive so we want to be able to do both playback and capture using a single set of pins.
This patch introduces a combined clock mode for the Atmel SSC peripheral. Which allows playback and capture to use a single set of pins. Currently combined clock is only supported on the TF/TK pins (some incomplete support exists for using RF/RK).
I have tested this patch on our AT91SAM9G45 + TLV320AIC26 platform. Playback and capture work individually. Simultaneous playback and capture have been tested by connecting a loopback cable on the linein and lineout jacks and then doing:
arecord -c 2 -f S16_LE -r 44100 > recording.wav & aplay 500hz_sine.wav
This patch is posted as RFC since the approach is incomplete and a bit hackish. I am mostly interested in knowing if this is a sensible approach, and could be cleaned up for mainline inclusion, or if there is a better way to do this.
Signed-off-by: Ryan Mallon ryan@bluewatersys.com
Tested-by: Sergey Lapin slapin@ossfans.org