14 Nov
2014
14 Nov
'14
3:04 a.m.
Hi
Il 14/nov/2014 09:58 "Craig McQueen" craig.mcqueen@beamcommunications.com ha scritto:
On 14/11/14 12:45, Michael Trimarchi wrote:
Hi
Il 14/nov/2014 09:44 "Craig McQueen" <
craig.mcqueen@beamcommunications.com> ha scritto:
I'm testing the 3.14.19 kernel for i.MX28 EVK, which has an SGTL5000
CODEC. I've also tested on the 3.18-rc4 kernel and confirmed this issue still occurs.
Are you using it in master or slave mode?
Try to change the pin mux of data line in order to be hz in idle mode and add a small pull down resistor. Can you check if the dataline is up when clocks go off?
Michael
For the i.MX28 EVK, the SGTL5000 is in slave mode.
-- Craig McQueen