Hi,
On Aug 24 2018 03:32, Guedes, Andre wrote:
On Wed, 2018-08-22 at 21:25 -0500, Pierre-Louis Bossart wrote:
On 08/22/2018 07:46 PM, Guedes, Andre wrote:
On Tue, 2018-08-21 at 17:51 -0500, Pierre-Louis Bossart wrote:
> +static int aaf_mclk_start_playback(snd_pcm_aaf_t *aaf) > +{ > + int res; > + struct timespec now; > + struct itimerspec itspec; > + snd_pcm_ioplug_t *io = &aaf->io; > + > + res = clock_gettime(CLOCK_REF, &now); > + if (res < 0) { > + SNDERR("Failed to get time from clock"); > + return -errno; > + } > + > + aaf->mclk_period = (NSEC_PER_SEC * aaf- >> frames_per_pkt) / > > io->rate;
is this always an integer? If not, don't you have a systematic arithmetic error?
NSEC_PER_SEC is 64-bit so I don't see an arithmetic error during calculation (e.g. integer overflow). Not sure this was your concern, though. Let me know otherwise.
No, I was talking about the fractional part, e.g with 256 frames with 44.1kHz you have a period of 5804988.662131519274376 - so your math adds a truncation. same with 48khz, the fractional part is .333
I burned a number of my remaining neurons chasing a <100 ppb error which led to underruns after 10 hours, so careful now with truncation...
Thanks for clarifying.
Yes, we can end up having a fractional period which is truncated. Note that both 'frames' and 'rate' are configured by the user. The user should set 'frames' as multiple of 'rate' whenever possible to avoid inaccuracy.
It's unlikely to happen. it's classic in audio that people want powers of two for fast filtering, and don't really care that the periods are fractional. If you cannot guarantee long-term operation without timing issues, you should add constraints to the frames and rates so that there is no surprise.
Fair enough. So for now I'll add a constraint on frames and rates to unsure no surprises. Later we can revisit this and implement the compesation mechanism you described below.
In my understanding, transmission timing of 'AVTP Audio format' in IEEE 1722:2016 is similar to 'blocking transmission' of IEC 61883-6. Packets have fixed size of data in its payload, thus include the same number of PCM frames. Talkers are expected to fill data till the size, then transmit the packet. Receivers are expected to perform buffering till presentation timestamp is elapsed, with one (or more) AVTPDUs.
In clause 7.7 'AAF and SRP', I can see below sentence: '... A 44.1-kHz stream with 6 samples per AAF AVTPDU and an FQTSS observation interval of 125 us also has an SRP reservation of 1 frame per observation interval even though there will periodically be an observation interval where no AAF AVTPDU will be transmitted since it has a transmission interval of 136.054 us as can be seen in the example given in Figure 36.' This means that packet transmission is not always periodically. There's a blank cycle per several cycles; like IEC 61883-1/6.
In my opinion, it's better calculate proper interval of timerfd to create the black interval, without truncate the fraction. Then, give proper constrains to SND_PCM_IOPLUG_HW_PERIOD_BYTES to prevent applications from underrun.
Furthermore, in your proposal, the number of PCM frames in one AVTPDU is decided according to plugin parameter. However, if compliant to specification, it's better to decide the number according to 'FQTSS observation interval'. I can see recommendations in two cases; FQTSS = 125 us and 256 us, in Table 17 and 18 of IEEE 1212:2016.
Regards
Takashi Sakamoto