From: Kuninori Morimoto kuninori.morimoto.gx@renesas.com
R-Car sound uses Audio DMAC and Audio DMAC peri peri. Audio DMAC peri peri transfers data inside circuit.
DMA transfer needs source / destination address, and destination address can be set via dmaengine_slave_config(). The source address can be set when starting DMAEngine. Because Audio DMAC peri peri always ignores its value, current driver always used same source address for Audio DMAC / Audio DMAC peri peri (Audio DMAC peri peri source / destination address is always fixed value) But, This is not good match for DT booting. This patch properly uses DMA start address for Audio DMAC / Audio DMAC peri peri.
Signed-off-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com --- v1 -> v2
- based on latest mark/topic/rcar
sound/soc/sh/rcar/core.c | 2 ++ sound/soc/sh/rcar/rsnd.h | 1 + 2 files changed, 3 insertions(+)
diff --git a/sound/soc/sh/rcar/core.c b/sound/soc/sh/rcar/core.c index 4435a31e..49d9b31 100644 --- a/sound/soc/sh/rcar/core.c +++ b/sound/soc/sh/rcar/core.c @@ -200,6 +200,7 @@ void rsnd_dma_start(struct rsnd_dma *dma) struct dma_async_tx_descriptor *desc;
desc = dmaengine_prep_dma_cyclic(dma->chan, + (dma->addr) ? dma->addr : substream->runtime->dma_addr, snd_pcm_lib_buffer_bytes(substream), snd_pcm_lib_period_bytes(substream), @@ -347,6 +348,7 @@ int rsnd_dma_init(struct rsnd_priv *priv, struct rsnd_dma *dma, if (ret < 0) goto rsnd_dma_init_err;
+ dma->addr = is_play ? cfg.src_addr : cfg.dst_addr; dma->dir = is_play ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
return 0; diff --git a/sound/soc/sh/rcar/rsnd.h b/sound/soc/sh/rcar/rsnd.h index 425b22e..631b149 100644 --- a/sound/soc/sh/rcar/rsnd.h +++ b/sound/soc/sh/rcar/rsnd.h @@ -158,6 +158,7 @@ struct rsnd_dma { struct sh_dmae_slave slave; struct dma_chan *chan; enum dma_transfer_direction dir; + dma_addr_t addr; };
void rsnd_dma_start(struct rsnd_dma *dma);