2015-02-28 3:21 GMT+08:00 David Henningsson <david.henningsson@canonical.com
:
On 2015-02-27 20:03, Ingo Brückl wrote:
"Line Out" has been used throughout, so don't abbreviate.
The abbreviation is on purpose because there are string lengths you need to stay under, especially combined with other stuff, an extreme example would be "Front Headphone+Line Out Surround Playback Volume" that might get cut off.
Also, "Headphone+LO" is already put into PulseAudio (and potentially other places as well).
So please don't change this.
Speaker+LO playback switch at pin complex Line Out is not a correct name
Should "Front Playback Switch" more meaningfull when the codecs have "Surround Playback Switch", "LFE Playback Switch" and "Center Playback Switch " ?
"Master Playback Volume" is not correct name too
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Speaker+LO Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Line Out Jack", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0001003c: IN OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x01014010: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x0c
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Master Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC662 rev3 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Surround Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x04 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Center Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="LFE Playback Volume", index=0, device=0 ControlAmp: chs=2, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0
Signed-off-by: Ingo Brückl ib@wupperonline.de
diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index b680b4e..834730f 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -1103,9 +1103,9 @@ static const char *get_line_out_pfx(struct hda_codec *codec, int ch, if (hp_lo_shared && spk_lo_shared) return spec->vmaster_mute.hook ? "PCM" : "Master"; if (hp_lo_shared)
return "Headphone+LO";
return "Headphone+Line Out"; if (spk_lo_shared)
return "Speaker+LO";
return "Speaker+Line Out"; } }@@ -4619,7 +4619,7 @@ static const char * const slave_pfxs[] = { "CLFE", "Bass Speaker", "PCM", "Speaker Front", "Speaker Surround", "Speaker CLFE", "Speaker Side", "Headphone Front", "Headphone Surround", "Headphone CLFE",
"Headphone Side", "Headphone+LO", "Speaker+LO",
"Headphone Side", "Headphone+Line Out", "Speaker+Line Out", NULL,-- David Henningsson, Canonical Ltd. https://launchpad.net/~diwic
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel