From: Frank Shi shifu0704@thundersoft.com
add tas2770 smart PA dt bindings
Signed-off-by: Frank Shi shifu0704@thundersoft.com --- Documentation/devicetree/bindings/tas2770.txt | 38 +++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 Documentation/devicetree/bindings/tas2770.txt
diff --git a/Documentation/devicetree/bindings/tas2770.txt b/Documentation/devicetree/bindings/tas2770.txt new file mode 100644 index 0000000..f70b310 --- /dev/null +++ b/Documentation/devicetree/bindings/tas2770.txt @@ -0,0 +1,38 @@ +Texas Instruments TAS2770 Smart PA + +The TAS2770 is a mono, digital input Class-D audio amplifier optimized for +efficiently driving high peak power into small loudspeakers. +Integrated speaker voltage and current sense provides for +real time monitoring of loudspeaker behavior. + +Required properties: + + - compatible: - Should contain "ti,tas2770". + - reg: - The i2c address. Should contain <0x4c>, <0x4d>,<0x4e>, or <0x4f>. + - #address-cells - Should be <1>. + - #size-cells - Should be <0>. + - ti,asi-format: - Sets TDM RX capture edge. 0->Rising; 1->Falling. + - ti,left-slot: - Sets TDM RX left time slots. + - ti,right-slot: - Sets TDM RX right time slots. + - ti,imon-slot-no:- TDM TX current sense time slot. + - ti,vmon-slot-no:- TDM TX voltage sense time slot. + +Optional properties: + + - reset-gpio: Reset GPIO number of left device. + - irq-gpio: IRQ GPIO number of left device. + +Examples: + + tas2770@4c { + compatible = "ti,tas2770"; + reg = <0x4c>; + reset-gpio = <&gpio15 1 GPIO_ACTIVE_LOW>; + irq-gpio = <&gpio16 1 GPIO_ACTIVE_LOW>; + ti,asi-format = <0>; + ti,left-slot = <0>; + ti,right-slot = <1>; + ti,imon-slot-no = <0>; + ti,vmon-slot-no = <2>; + }; +