The s3c_gpio_cfgall_range() function is an internal interface of the samsung gpio driver and should not be called directly by drivers, so move the iis pin initialization into the boards.
Note that the s3c2412-i2s driver has no boards using it in mainline linux, the driver gets selected for the jive machine but is never instantiated.
Signed-off-by: Arnd Bergmann arnd@arndb.de --- arch/arm/mach-s3c24xx/mach-gta02.c | 4 ++++ arch/arm/mach-s3c24xx/mach-h1940.c | 3 +++ arch/arm/mach-s3c24xx/mach-mini2440.c | 5 +++++ arch/arm/mach-s3c24xx/mach-n30.c | 5 +++++ arch/arm/mach-s3c24xx/mach-nexcoder.c | 5 +++++ arch/arm/mach-s3c24xx/mach-otom.c | 6 ++++++ arch/arm/mach-s3c24xx/mach-qt2410.c | 3 +++ arch/arm/mach-s3c24xx/mach-rx1950.c | 3 +++ arch/arm/mach-s3c24xx/mach-rx3715.c | 4 ++++ arch/arm/mach-s3c24xx/mach-smdk2410.c | 5 +++++ arch/arm/mach-s3c24xx/mach-smdk2413.c | 4 ++++ arch/arm/mach-s3c24xx/mach-smdk2440.c | 6 +++++- arch/arm/mach-s3c24xx/mach-vstms.c | 6 +++++- arch/arm/mach-s3c24xx/simtec-audio.c | 6 ++++++ sound/soc/samsung/s3c2412-i2s.c | 7 ------- sound/soc/samsung/s3c24xx-i2s.c | 7 ------- 16 files changed, 63 insertions(+), 16 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index 526fd0933289..1ca0460d82f4 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -540,6 +540,10 @@ static void __init gta02_machine_init(void)
i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); + gpiod_add_lookup_table(>a02_audio_gpio_table); platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices)); pm_power_off = gta02_poweroff; diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index 922d53bacbdf..11f705fb5e32 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -709,6 +709,9 @@ static void __init h1940_init(void) s3c24xx_fb_set_platdata(&h1940_fb_info); gpiod_add_lookup_table(&h1940_mmc_gpio_table); gpiod_add_lookup_table(&h1940_audio_gpio_table); + /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); s3c24xx_mci_set_platdata(&h1940_mmc_cfg); s3c24xx_udc_set_platdata(&h1940_udc_cfg); s3c24xx_ts_set_platdata(&h1940_ts_cfg); diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index 9035f868fb34..bb44b8704d64 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -685,6 +685,11 @@ static void __init mini2440_init(void) s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP); s3c_gpio_cfgpin(mini2440_buttons[i].gpio, S3C2410_GPIO_INPUT); } + + /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); + if (features.lcd_index != -1) { int li;
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index d856f23939af..1836f1cc0992 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c @@ -36,6 +36,7 @@ #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> +#include <plat/gpio-cfg.h>
#include <asm/mach/arch.h> #include <asm/mach/irq.h> @@ -570,6 +571,10 @@ static void __init n30_init(void) S3C2410_MISCCR_USBSUSPND0 | S3C2410_MISCCR_USBSUSPND1, 0x0);
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); + if (machine_is_n30()) { /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c index c2f34758ccb6..a05c92b6de2e 100644 --- a/arch/arm/mach-s3c24xx/mach-nexcoder.c +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c @@ -145,6 +145,11 @@ static void __init nexcoder_init_time(void) static void __init nexcoder_init(void) { s3c_i2c0_set_platdata(NULL); + + /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); + platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices)); };
diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c index 4e24d89e870b..c834f16e5ba0 100644 --- a/arch/arm/mach-s3c24xx/mach-otom.c +++ b/arch/arm/mach-s3c24xx/mach-otom.c @@ -24,6 +24,8 @@
#include <mach/hardware.h> #include <mach/regs-gpio.h> +#include <mach/gpio-samsung.h> +#include <plat/gpio-cfg.h>
#include <plat/cpu.h> #include <plat/devs.h> @@ -107,6 +109,10 @@ static void __init otom11_init_time(void) static void __init otom11_init(void) { s3c_i2c0_set_platdata(NULL); + + /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); platform_add_devices(otom11_devices, ARRAY_SIZE(otom11_devices)); }
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index 5d48e5b6e738..3cf8423c76c6 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -337,6 +337,9 @@ static void __init qt2410_machine_init(void) s3c24xx_udc_set_platdata(&qt2410_udc_cfg); s3c_i2c0_set_platdata(NULL);
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); gpiod_add_lookup_table(&qt2410_spi_gpiod_table); platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices)); s3c_pm_init(); diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index 9f3b0f18cd36..4eeede398775 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -825,6 +825,9 @@ static void __init rx1950_init_machine(void)
pwm_add_table(rx1950_pwm_lookup, ARRAY_SIZE(rx1950_pwm_lookup)); gpiod_add_lookup_table(&rx1950_audio_gpio_table); + /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
i2c_register_board_info(0, rx1950_i2c_devices, diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c index 529c6faf862f..2542c523ad46 100644 --- a/arch/arm/mach-s3c24xx/mach-rx3715.c +++ b/arch/arm/mach-s3c24xx/mach-rx3715.c @@ -39,6 +39,7 @@ #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> +#include <plat/gpio-cfg.h>
#include <plat/cpu.h> #include <plat/devs.h> @@ -199,6 +200,9 @@ static void __init rx3715_init_machine(void)
s3c_nand_set_platdata(&rx3715_nand_info); s3c24xx_fb_set_platdata(&rx3715_fb_info); + /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices)); }
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c index 18dfef52c8bf..02adaac4d6df 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2410.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c @@ -19,6 +19,8 @@ #include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <mach/gpio-samsung.h> +#include <plat/gpio-cfg.h>
#include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -94,6 +96,9 @@ static void __init smdk2410_init(void) { s3c_i2c0_set_platdata(NULL); platform_add_devices(smdk2410_devices, ARRAY_SIZE(smdk2410_devices)); + /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); smdk_machine_init(); }
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index ca80167f268d..2bba4f1fa7ee 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c @@ -37,6 +37,7 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <mach/gpio-samsung.h> #include <mach/fb.h> +#include <plat/gpio-cfg.h>
#include <plat/devs.h> #include <plat/cpu.h> @@ -119,6 +120,9 @@ static void __init smdk2413_machine_init(void)
s3c24xx_udc_set_platdata(&smdk2413_udc_cfg); s3c_i2c0_set_platdata(NULL); + /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE);
platform_add_devices(smdk2413_devices, ARRAY_SIZE(smdk2413_devices)); smdk_machine_init(); diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c index 7bafcd8ea104..f0fceda3e8e6 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2440.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c @@ -29,6 +29,8 @@
#include <mach/regs-gpio.h> #include <mach/regs-lcd.h> +#include <mach/gpio-samsung.h> +#include <plat/gpio-cfg.h>
#include <mach/fb.h> #include <linux/platform_data/i2c-s3c2410.h> @@ -167,7 +169,9 @@ static void __init smdk2440_machine_init(void) { s3c24xx_fb_set_platdata(&smdk2440_fb_info); s3c_i2c0_set_platdata(NULL); - + /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices)); smdk_machine_init(); } diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index d76b28b65e65..f333ca05de68 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -31,6 +31,8 @@
#include <mach/regs-gpio.h> #include <mach/regs-lcd.h> +#include <mach/gpio-samsung.h> +#include <plat/gpio-cfg.h>
#include <mach/fb.h>
@@ -149,7 +151,9 @@ static void __init vstms_init(void) { s3c_i2c0_set_platdata(NULL); s3c_nand_set_platdata(&vstms_nand_info); - + /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices)); }
diff --git a/arch/arm/mach-s3c24xx/simtec-audio.c b/arch/arm/mach-s3c24xx/simtec-audio.c index 12e17f82dae3..0c12ba4a4704 100644 --- a/arch/arm/mach-s3c24xx/simtec-audio.c +++ b/arch/arm/mach-s3c24xx/simtec-audio.c @@ -14,6 +14,8 @@
#include <mach/hardware.h> #include <mach/regs-gpio.h> +#include <mach/gpio-samsung.h> +#include <plat/gpio-cfg.h>
#include <linux/platform_data/asoc-s3c24xx_simtec.h> #include <plat/devs.h> @@ -65,6 +67,10 @@ int __init simtec_audio_add(const char *name, bool has_lr_routing, if (has_lr_routing) simtec_audio_platdata.startup = simtec_audio_startup_lrroute;
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); + platform_device_register(&s3c_device_iis); platform_device_register(&simtec_audio_dev); return 0; diff --git a/sound/soc/samsung/s3c2412-i2s.c b/sound/soc/samsung/s3c2412-i2s.c index 5bf571762e89..fd17765670f1 100644 --- a/sound/soc/samsung/s3c2412-i2s.c +++ b/sound/soc/samsung/s3c2412-i2s.c @@ -19,9 +19,6 @@ #include <sound/soc.h> #include <sound/pcm_params.h>
-#include <mach/gpio-samsung.h> -#include <plat/gpio-cfg.h> - #include "dma.h" #include "regs-i2s-v2.h" #include "s3c2412-i2s.h" @@ -70,10 +67,6 @@ static int s3c2412_i2s_probe(struct snd_soc_dai *dai) if (ret) goto err;
- /* Configure the I2S pins (GPE0...GPE4) in correct mode */ - s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_NONE); - return 0;
err: diff --git a/sound/soc/samsung/s3c24xx-i2s.c b/sound/soc/samsung/s3c24xx-i2s.c index 92bdaf0878f8..5ca263f6a39e 100644 --- a/sound/soc/samsung/s3c24xx-i2s.c +++ b/sound/soc/samsung/s3c24xx-i2s.c @@ -18,10 +18,7 @@ #include <sound/soc.h> #include <sound/pcm_params.h>
-#include <mach/gpio-samsung.h> -#include <plat/gpio-cfg.h> #include "regs-iis.h" - #include "dma.h" #include "s3c24xx-i2s.h"
@@ -348,10 +345,6 @@ static int s3c24xx_i2s_probe(struct snd_soc_dai *dai) if (ret) return ret;
- /* Configure the I2S pins (GPE0...GPE4) in correct mode */ - s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_NONE); - writel(S3C2410_IISCON_IISEN, s3c24xx_i2s.regs + S3C2410_IISCON);
s3c24xx_snd_txctrl(0);