On Mon, 2008-01-14 at 17:11 +0000, De Fuuss wrote:
The jumper is now set to enable onboard (Intel HDA) audio. At the back of the barebone there are 5 jacks (4 channels for 7.1 and 1 line in channel) + 1 spdif out. From these, using 6stack-hp, only the "Front L/R" jack works, none of the others On the front, there are 2 jacks (1 headphones and 1 microphone). The headphone jack works.
Can you tell us how you did the testing?
From the driver code, it's not likely that all other jacks don't work.
Because the driver support up-mixing, you can play a 2-channel music and get sound from 4 jacks on the back panel.
I read the dmesg output that you sent to me. But there is no alsa debug info in it. Did you really configure the driver with the option "--with-debug=detect"? If not, please try it and paste the dmesg info, it is helpful to trace the issue.
Best regards! Jiang,zhe
All the channels have been set to 100% in alsamixer.
Considering that a week ago I had 0.0 and today I'm at 2.0, it's already a improvement. ;-)
Patrick
Subject: Re: [alsa-devel] intel-hd on an intel G33 motherboard From: zhe.jiang@intel.com To: fuuss@hotmail.com CC: cmatsuoka@gmail.com; alsa-devel@alsa-project.org Date: Mon, 14 Jan 2008 16:43:00 +0800
On Mon, 2008-01-14 at 02:06 +0800, De Fuuss wrote:
Following your advice, I tested per channel output. Using either 6stack-dig or 6stack-hp, I get noise from Front Left and Right jacks, using speaker-test (X=1 and 2) but not on any other channels.
Hi, Did you mean that after you changed the 'Jumper', you could get the sound from the Front jack on the back channel?
Patrick
Date: Sun, 13 Jan 2008 01:01:50 -0200 From: cmatsuoka@gmail.com To: fuuss@hotmail.com CC: zhe.jiang@intel.com; alsa-devel@alsa-project.org Subject: Re: [alsa-devel] intel-hd on an intel G33 motherboard
2008/1/12 De Fuuss :
I get the uneasy feeling that something is messed up with this
board. Anyway, for completeness' sake, I attached the results of amixer contents, cat /proc/asound/card0/codec#0 and dmesg for the module loaded as 6stack-dig. I have to try 6stack-hp again to confirm if I get something there.
I fixed the Inspiron output, and I'm adding the SG33G5M codec to the codecgraph codecs collection (git repository at http://helllabs.org/git/codecgraph.git). If nodes 0x14, 0x15, 0x16
and
0x17 are the front, rear, clfe and side connectors in the back
panel,
6stack-hp should work (at least for the outputs). You can test the outputs using "speaker-test -Dplug:surround71 -c8 -sX" (where X
varies
from 1 to 8) and a pair of headphones. _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/