At Fri, 09 Jan 2015 19:50:36 -0500, David Flater wrote:
Applicable to any kernel since 2013:
The special case added in commit 1338fc97d07a did not handle the possibility that the address space on an AWE64 Value would wrap around at 512 KiB. That is what it does, so the memory is still not detected on those cards.
Fix that with a logic clean-up that eliminates the need for a special case.
Signed-off-by: David Flater dave@flaterco.com
History: 2015-01-09 v2: In response to feedback from Takashi Iwai, 1. Optimize for diff size. 1a. Use goto to avoid indenting and repeating code. 1b. Jettison new debugging printouts. 2. Split printk into second patch. Retested on CT4390 (4 MiB) and CT4380 (512 KiB). 2015-01-08 v1 patch sent to LKML, Alsa Devel and maintainers. Tested on unexpanded CT4390 (4 MiB), CT4520 (512 KiB), and CT4380 (512 KiB).
CT4380 is commonly said to come with 1 MiB of DRAM, but Creative's AWE Control app agreed that mine has only 512 KiB. It has the same memory chip as the CT4520.
And you couldn't actually use the 1MB, right?
The affected function first appeared in alsa-driver-0.3.0 and was merged in linux-2.5.5. Its somewhat different ancestor was in sound/oss/awe_wave.c.
sound/isa/sb/emu8000.c | 33 +++++++++++++++------------------ 1 file changed, 15 insertions(+), 18 deletions(-)
diff --git a/sound/isa/sb/emu8000.c b/sound/isa/sb/emu8000.c index 45fcdff..3dcf80e 100644 --- a/sound/isa/sb/emu8000.c +++ b/sound/isa/sb/emu8000.c @@ -378,13 +378,12 @@ init_arrays(struct snd_emu8000 *emu) static void size_dram(struct snd_emu8000 *emu) {
- int i, size, detected_size;
int i, size;
if (emu->dram_checked) return;
size = 0;
detected_size = 0;
/* write out a magic number */ snd_emu8000_dma_chan(emu, 0, EMU8000_RAM_WRITE);
@@ -392,11 +391,12 @@ size_dram(struct snd_emu8000 *emu) EMU8000_SMALW_WRITE(emu, EMU8000_DRAM_OFFSET); EMU8000_SMLD_WRITE(emu, UNIQUE_ID1); snd_emu8000_init_fm(emu); /* This must really be here and not 2 lines back even */
- snd_emu8000_write_wait(emu);
- goto size_dram_ID1_check; /* If that fails, we have no RAM. */
Jumping into the middle of the loop isn't good. It worsens the readability a lot. OTOH, jumping to the exit of the loop is a standard idiom like the patch below.
thanks,
Takashi
diff --git a/sound/isa/sb/emu8000.c b/sound/isa/sb/emu8000.c index 45fcdff611f9..6e721a8b7c9e 100644 --- a/sound/isa/sb/emu8000.c +++ b/sound/isa/sb/emu8000.c @@ -378,13 +378,12 @@ init_arrays(struct snd_emu8000 *emu) static void size_dram(struct snd_emu8000 *emu) { - int i, size, detected_size; + int i, size;
if (emu->dram_checked) return;
size = 0; - detected_size = 0;
/* write out a magic number */ snd_emu8000_dma_chan(emu, 0, EMU8000_RAM_WRITE); @@ -393,9 +392,14 @@ size_dram(struct snd_emu8000 *emu) EMU8000_SMLD_WRITE(emu, UNIQUE_ID1); snd_emu8000_init_fm(emu); /* This must really be here and not 2 lines back even */
- while (size < EMU8000_MAX_DRAM) { + /* Detect first 512 KiB */ + snd_emu8000_write_wait(emu); + EMU8000_SMALR_WRITE(emu, EMU8000_DRAM_OFFSET); + EMU8000_SMLD_READ(emu); /* discard stale data */ + if (EMU8000_SMLD_READ(emu) == UNIQUE_ID1) + goto skip_detect;
- size += 512 * 1024; /* increment 512kbytes */ + for (size = 512 * 1024; size < EMU8000_MAX_DRAM; size += 512 * 1024) {
/* Write a unique data on the test address. * if the address is out of range, the data is written on @@ -429,20 +433,9 @@ size_dram(struct snd_emu8000 *emu) if (EMU8000_SMLD_READ(emu) != UNIQUE_ID1) break; /* we must have wrapped around */ snd_emu8000_read_wait(emu); - - /* Otherwise, it's valid memory. */ - detected_size = size + 512 * 1024; - } - - /* Distinguish 512 KiB from 0. */ - if (detected_size == 0) { - snd_emu8000_read_wait(emu); - EMU8000_SMALR_WRITE(emu, EMU8000_DRAM_OFFSET); - EMU8000_SMLD_READ(emu); /* discard stale data */ - if (EMU8000_SMLD_READ(emu) == UNIQUE_ID1) - detected_size = 512 * 1024; }
+ skip_detect: /* wait until FULL bit in SMAxW register is false */ for (i = 0; i < 10000; i++) { if ((EMU8000_SMALW_READ(emu) & 0x80000000) == 0) @@ -455,9 +448,9 @@ size_dram(struct snd_emu8000 *emu) snd_emu8000_dma_chan(emu, 1, EMU8000_RAM_CLOSE);
snd_printdd("EMU8000 [0x%lx]: %d Kb on-board memory detected\n", - emu->port1, detected_size/1024); + emu->port1, size / 1024);
- emu->mem_size = detected_size; + emu->mem_size = size; emu->dram_checked = 1; }