From: Liam Girdwood liam.r.girdwood@linux.intel.com
Add support for loading DSP firmware on Intel HDA based platforms.
Signed-off-by: Keyon Jie yang.jie@linux.intel.com Signed-off-by: Liam Girdwood liam.r.girdwood@linux.intel.com Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- sound/soc/sof/intel/hda-loader.c | 359 +++++++++++++++++++++++++++++++ 1 file changed, 359 insertions(+) create mode 100644 sound/soc/sof/intel/hda-loader.c
diff --git a/sound/soc/sof/intel/hda-loader.c b/sound/soc/sof/intel/hda-loader.c new file mode 100644 index 000000000000..6a5e07df4116 --- /dev/null +++ b/sound/soc/sof/intel/hda-loader.c @@ -0,0 +1,359 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// +// This file is provided under a dual BSD/GPLv2 license. When using or +// redistributing this file, you may do so under either license. +// +// Copyright(c) 2018 Intel Corporation. All rights reserved. +// +// Authors: Liam Girdwood liam.r.girdwood@linux.intel.com +// Ranjani Sridharan ranjani.sridharan@linux.intel.com +// Rander Wang rander.wang@intel.com +// Keyon Jie yang.jie@linux.intel.com +// + +/* + * Hardware interface for HDA DSP code loader + */ + +#include <linux/firmware.h> +#include <sound/hdaudio_ext.h> +#include <sound/sof.h> +#include "../ops.h" +#include "hda.h" + +#define HDA_FW_BOOT_ATTEMPTS 3 + +static int cl_stream_prepare(struct snd_sof_dev *sdev, unsigned int format, + unsigned int size, struct snd_dma_buffer *dmab, + int direction) +{ + struct hdac_ext_stream *dsp_stream = NULL; + struct hdac_stream *hstream; + struct pci_dev *pci = to_pci_dev(sdev->dev); + int ret; + + if (direction == SNDRV_PCM_STREAM_PLAYBACK) { + dsp_stream = hda_dsp_stream_get(sdev, direction); + } else { + dev_err(sdev->dev, "error: code loading DMA is playback only\n"); + return -EINVAL; + } + + if (!dsp_stream) { + dev_err(sdev->dev, "error: no stream available\n"); + return -ENODEV; + } + hstream = &dsp_stream->hstream; + + /* allocate DMA buffer */ + ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV_SG, &pci->dev, size, dmab); + if (ret < 0) { + dev_err(sdev->dev, "error: memory alloc failed: %x\n", ret); + goto error; + } + + hstream->period_bytes = 0;/* initialize period_bytes */ + hstream->format_val = format; + hstream->bufsize = size; + + ret = hda_dsp_stream_hw_params(sdev, dsp_stream, dmab, NULL); + if (ret < 0) { + dev_err(sdev->dev, "error: hdac prepare failed: %x\n", ret); + goto error; + } + + hda_dsp_stream_spib_config(sdev, dsp_stream, HDA_DSP_SPIB_ENABLE, size); + + return hstream->stream_tag; + +error: + hda_dsp_stream_put(sdev, direction, hstream->stream_tag); + snd_dma_free_pages(dmab); + return ret; +} + +/* + * first boot sequence has some extra steps. core 0 waits for power + * status on core 1, so power up core 1 also momentarily, keep it in + * reset/stall and then turn it off + */ +static int cl_dsp_init(struct snd_sof_dev *sdev, const void *fwdata, + u32 fwsize, int stream_tag) +{ + struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; + const struct sof_intel_dsp_desc *chip = hda->desc; + int ret; + + /* step 1: power up corex */ + ret = hda_dsp_core_power_up(sdev, chip->cores_mask); + if (ret < 0) { + dev_err(sdev->dev, "error: dsp core 0/1 power up failed\n"); + goto err; + } + + /* step 2: purge FW request */ + snd_sof_dsp_write(sdev, HDA_DSP_BAR, chip->ipc_req, + chip->ipc_req_mask | (HDA_DSP_IPC_PURGE_FW | + ((stream_tag - 1) << 9))); + + /* step 3: unset core 0 reset state & unstall/run core 0 */ + ret = hda_dsp_core_run(sdev, HDA_DSP_CORE_MASK(0)); + if (ret < 0) { + dev_err(sdev->dev, "error: dsp core start failed %d\n", ret); + ret = -EIO; + goto err; + } + + /* step 4: wait for IPC DONE bit from ROM */ + ret = snd_sof_dsp_register_poll(sdev, HDA_DSP_BAR, + chip->ipc_ack, + chip->ipc_ack_mask, chip->ipc_ack_mask, + HDA_DSP_INIT_TIMEOUT, + HDA_DSP_REG_POLL_INTERVAL_US); + + if (ret < 0) { + dev_err(sdev->dev, "error: waiting for HIPCIE done\n"); + goto err; + } + + /* step 5: power down corex */ + ret = hda_dsp_core_power_down(sdev, + chip->cores_mask & ~(HDA_DSP_CORE_MASK(0))); + if (ret < 0) { + dev_err(sdev->dev, "error: dsp core x power down failed\n"); + goto err; + } + + /* step 6: enable IPC interrupts */ + hda_dsp_ipc_int_enable(sdev); + + /* step 7: wait for ROM init */ + ret = snd_sof_dsp_register_poll(sdev, HDA_DSP_BAR, + HDA_DSP_SRAM_REG_ROM_STATUS, + HDA_DSP_ROM_STS_MASK, HDA_DSP_ROM_INIT, + HDA_ROM_INIT_TIMEOUT, + HDA_DSP_REG_POLL_INTERVAL_US); + if (!ret) + return 0; + +err: + hda_dsp_dump(sdev, SOF_DBG_REGS | SOF_DBG_PCI | SOF_DBG_MBOX); + hda_dsp_core_reset_power_down(sdev, chip->cores_mask); + + return ret; +} + +static int cl_trigger(struct snd_sof_dev *sdev, + struct hdac_ext_stream *stream, int cmd) +{ + struct hdac_stream *hstream = &stream->hstream; + int sd_offset = SOF_STREAM_SD_OFFSET(hstream); + + /* code loader is special case that reuses stream ops */ + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + wait_event_timeout(sdev->waitq, !sdev->code_loading, + HDA_DSP_CL_TRIGGER_TIMEOUT); + + snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR, SOF_HDA_INTCTL, + 1 << hstream->index, + 1 << hstream->index); + + snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR, + sd_offset, + SOF_HDA_SD_CTL_DMA_START | + SOF_HDA_CL_DMA_SD_INT_MASK, + SOF_HDA_SD_CTL_DMA_START | + SOF_HDA_CL_DMA_SD_INT_MASK); + + hstream->running = true; + return 0; + default: + return hda_dsp_stream_trigger(sdev, stream, cmd); + } +} + +static struct hdac_ext_stream *get_stream_with_tag(struct snd_sof_dev *sdev, + int tag) +{ + struct hdac_bus *bus = sof_to_bus(sdev); + struct hdac_stream *s; + + /* get stream with tag */ + list_for_each_entry(s, &bus->stream_list, list) { + if (s->direction == SNDRV_PCM_STREAM_PLAYBACK && + s->stream_tag == tag) { + return stream_to_hdac_ext_stream(s); + } + } + + return NULL; +} + +static int cl_cleanup(struct snd_sof_dev *sdev, struct snd_dma_buffer *dmab, + struct hdac_ext_stream *stream) +{ + struct hdac_stream *hstream = &stream->hstream; + int sd_offset = SOF_STREAM_SD_OFFSET(hstream); + int ret; + + ret = hda_dsp_stream_spib_config(sdev, stream, HDA_DSP_SPIB_DISABLE, 0); + + hda_dsp_stream_put(sdev, SNDRV_PCM_STREAM_PLAYBACK, + hstream->stream_tag); + hstream->running = 0; + hstream->substream = NULL; + + /* reset BDL address */ + snd_sof_dsp_write(sdev, HDA_DSP_HDA_BAR, + sd_offset + SOF_HDA_ADSP_REG_CL_SD_BDLPL, 0); + snd_sof_dsp_write(sdev, HDA_DSP_HDA_BAR, + sd_offset + SOF_HDA_ADSP_REG_CL_SD_BDLPU, 0); + + snd_sof_dsp_write(sdev, HDA_DSP_HDA_BAR, sd_offset, 0); + snd_dma_free_pages(dmab); + dmab->area = NULL; + hstream->bufsize = 0; + hstream->format_val = 0; + + return ret; +} + +static int cl_copy_fw(struct snd_sof_dev *sdev, struct hdac_ext_stream *stream) +{ + int ret, status; + + ret = cl_trigger(sdev, stream, SNDRV_PCM_TRIGGER_START); + if (ret < 0) { + dev_err(sdev->dev, "error: DMA trigger start failed\n"); + return ret; + } + + status = snd_sof_dsp_register_poll(sdev, HDA_DSP_BAR, + HDA_DSP_SRAM_REG_ROM_STATUS, + HDA_DSP_ROM_STS_MASK, + HDA_DSP_ROM_FW_ENTERED, + HDA_DSP_BASEFW_TIMEOUT, + HDA_DSP_REG_POLL_INTERVAL_US); + + ret = cl_trigger(sdev, stream, SNDRV_PCM_TRIGGER_STOP); + if (ret < 0) { + dev_err(sdev->dev, "error: DMA trigger stop failed\n"); + return ret; + } + + return status; +} + +int hda_dsp_cl_boot_firmware(struct snd_sof_dev *sdev) +{ + struct snd_sof_pdata *plat_data = sdev->pdata; + struct hdac_ext_stream *stream; + struct firmware stripped_firmware; + int ret, ret1, tag, i; + + stripped_firmware.data = plat_data->fw->data; + stripped_firmware.size = plat_data->fw->size; + + /* init for booting wait */ + init_waitqueue_head(&sdev->boot_wait); + sdev->boot_complete = false; + + /* prepare DMA for code loader stream */ + tag = cl_stream_prepare(sdev, 0x40, stripped_firmware.size, + &sdev->dmab, SNDRV_PCM_STREAM_PLAYBACK); + + if (tag < 0) { + dev_err(sdev->dev, "error: dma prepare for fw loading err: %x\n", + tag); + return tag; + } + + /* get stream with tag */ + stream = get_stream_with_tag(sdev, tag); + if (!stream) { + dev_err(sdev->dev, + "error: could not get stream with stream tag %d\n", + tag); + ret = -ENODEV; + goto err; + } + + memcpy(sdev->dmab.area, stripped_firmware.data, + stripped_firmware.size); + + /* try ROM init a few times before giving up */ + for (i = 0; i < HDA_FW_BOOT_ATTEMPTS; i++) { + ret = cl_dsp_init(sdev, stripped_firmware.data, + stripped_firmware.size, tag); + + /* don't retry anymore if successful */ + if (!ret) + break; + + dev_err(sdev->dev, "error: Error code=0x%x: FW status=0x%x\n", + snd_sof_dsp_read(sdev, HDA_DSP_BAR, + HDA_DSP_SRAM_REG_ROM_ERROR), + snd_sof_dsp_read(sdev, HDA_DSP_BAR, + HDA_DSP_SRAM_REG_ROM_STATUS)); + dev_err(sdev->dev, "error: iteration %d of Core En/ROM load failed: %d\n", + i, ret); + } + + if (i == HDA_FW_BOOT_ATTEMPTS) { + dev_err(sdev->dev, "error: dsp init failed after %d attempts with err: %d\n", + i, ret); + goto cleanup; + } + + /* + * at this point DSP ROM has been initialized and + * should be ready for code loading and firmware boot + */ + ret = cl_copy_fw(sdev, stream); + if (!ret) + dev_dbg(sdev->dev, "Firmware download successful, booting...\n"); + else + dev_err(sdev->dev, "error: load fw failed ret: %d\n", ret); + +cleanup: + /* + * Perform codeloader stream cleanup. + * This should be done even if firmware loading fails. + */ + ret1 = cl_cleanup(sdev, &sdev->dmab, stream); + if (ret1 < 0) { + dev_err(sdev->dev, "error: Code loader DSP cleanup failed\n"); + + /* set return value to indicate cleanup failure */ + ret = ret1; + } + + /* return if both copying fw and stream clean up are successful */ + if (!ret) + return ret; + + /* dump dsp registers and disable DSP upon error */ +err: + hda_dsp_dump(sdev, SOF_DBG_REGS | SOF_DBG_PCI | SOF_DBG_MBOX); + + /* disable DSP */ + snd_sof_dsp_update_bits(sdev, HDA_DSP_PP_BAR, + SOF_HDA_REG_PP_PPCTL, + SOF_HDA_PPCTL_GPROCEN, 0); + return ret; +} + +/* pre fw run operations */ +int hda_dsp_pre_fw_run(struct snd_sof_dev *sdev) +{ + /* disable clock gating and power gating */ + return hda_dsp_ctrl_clock_power_gating(sdev, false); +} + +/* post fw run operations */ +int hda_dsp_post_fw_run(struct snd_sof_dev *sdev) +{ + /* re-enable clock gating and power gating */ + return hda_dsp_ctrl_clock_power_gating(sdev, true); +}