On Thu, Dec 25, 2008 at 03:13:58PM +0200, Thomas Schneider wrote:
Hi,
here is the output from alsa-info.sh
http://www.alsa-project.org/db/?f=8282910dc807e1f141896886cd5f8fd574117000
I found another small mistake. In the Mixer my Soundcard is shown as "Realtek ALC888". When i switch this to lines in patch_realtek.c then it is shown as "Realtek ALC1200".
static struct hda_codec_preset snd_hda_preset_realtek[] = { ......
{ .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc883 }, { .id = 0x10ec0888, .rev = 0x100101, .name = "ALC1200", .patch = patch_alc883 },.....
Good catch!
Reversing the order should fix the name.
Thanks, Fengguang --- hda - fix name for ALC1200
Move the more specific preset for ALC1200 above the general one for ALC888, so that it will have the chance to get matched and selected.
Reported-by: Thomas Schneider nailstudio@gmx.net Signed-off-by: Wu Fengguang fengguang.wu@intel.com --- sound/pci/hda/patch_realtek.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- sound-2.6.orig/sound/pci/hda/patch_realtek.c +++ sound-2.6/sound/pci/hda/patch_realtek.c @@ -16638,9 +16638,9 @@ static struct hda_codec_preset snd_hda_p .patch = patch_alc882 }, /* should be patch_alc883() in future */ { .id = 0x10ec0885, .name = "ALC885", .patch = patch_alc882 }, { .id = 0x10ec0887, .name = "ALC887", .patch = patch_alc883 }, - { .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc883 }, { .id = 0x10ec0888, .rev = 0x100101, .name = "ALC1200", .patch = patch_alc883 }, + { .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc883 }, { .id = 0x10ec0889, .name = "ALC889", .patch = patch_alc883 }, {} /* terminator */ };