From: Keita Maehara maehara@debian.org
These patches enable some YMF743 controls (Tone/3D/IEC958) that won't be detected with the current version of ALSA.
Signed-off-by: Keita Maehara maehara@debian.org
---
The first one contains only cosmetic changes to share a few YMF753-specific symbols with YMF743.
diff -r 4a3f9f77e676 include/ac97_codec.h --- a/include/ac97_codec.h Mon Sep 17 16:26:16 2007 +0200 +++ b/include/ac97_codec.h Tue Sep 18 00:27:24 2007 +0900 @@ -345,9 +345,9 @@ #define AC97_ALC650_GPIO_STATUS 0x78 #define AC97_ALC650_CLOCK 0x7a
-/* specific - Yamaha YMF753 */ -#define AC97_YMF753_DIT_CTRL2 0x66 /* DIT Control 2 */ -#define AC97_YMF753_3D_MODE_SEL 0x68 /* 3D Mode Select */ +/* specific - Yamaha YMF7x3 */ +#define AC97_YMF7X3_DIT_CTRL 0x66 /* DIT Control (YMF743) / 2 (YMF753) */ +#define AC97_YMF7X3_3D_MODE_SEL 0x68 /* 3D Mode Select */
/* specific - C-Media */ #define AC97_CM9738_VENDOR_CTRL 0x5a diff -r 4a3f9f77e676 pci/ac97/ac97_patch.c --- a/pci/ac97/ac97_patch.c Mon Sep 17 16:26:16 2007 +0200 +++ b/pci/ac97/ac97_patch.c Tue Sep 18 00:27:24 2007 +0900 @@ -205,8 +205,8 @@ static inline int is_shared_micin(struct
/* The following snd_ac97_ymf753_... items added by David Shust (dshust@shustring.com) */
-/* It is possible to indicate to the Yamaha YMF753 the type of speakers being used. */ -static int snd_ac97_ymf753_info_speaker(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) +/* It is possible to indicate to the Yamaha YMF7x3 the type of speakers being used. */ +static int snd_ac97_ymf7x3_info_speaker(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { static char *texts[3] = { "Standard", "Small", "Smaller" @@ -221,12 +221,12 @@ static int snd_ac97_ymf753_info_speaker( return 0; }
-static int snd_ac97_ymf753_get_speaker(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) +static int snd_ac97_ymf7x3_get_speaker(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); unsigned short val;
- val = ac97->regs[AC97_YMF753_3D_MODE_SEL]; + val = ac97->regs[AC97_YMF7X3_3D_MODE_SEL]; val = (val >> 10) & 3; if (val > 0) /* 0 = invalid */ val--; @@ -234,7 +234,7 @@ static int snd_ac97_ymf753_get_speaker(s return 0; }
-static int snd_ac97_ymf753_put_speaker(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) +static int snd_ac97_ymf7x3_put_speaker(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); unsigned short val; @@ -242,20 +242,20 @@ static int snd_ac97_ymf753_put_speaker(s if (ucontrol->value.enumerated.item[0] > 2) return -EINVAL; val = (ucontrol->value.enumerated.item[0] + 1) << 10; - return snd_ac97_update(ac97, AC97_YMF753_3D_MODE_SEL, val); -} - -static const struct snd_kcontrol_new snd_ac97_ymf753_controls_speaker = + return snd_ac97_update(ac97, AC97_YMF7X3_3D_MODE_SEL, val); +} + +static const struct snd_kcontrol_new snd_ac97_ymf7x3_controls_speaker = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "3D Control - Speaker", - .info = snd_ac97_ymf753_info_speaker, - .get = snd_ac97_ymf753_get_speaker, - .put = snd_ac97_ymf753_put_speaker, -}; - -/* It is possible to indicate to the Yamaha YMF753 the source to direct to the S/PDIF output. */ -static int snd_ac97_ymf753_spdif_source_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) + .info = snd_ac97_ymf7x3_info_speaker, + .get = snd_ac97_ymf7x3_get_speaker, + .put = snd_ac97_ymf7x3_put_speaker, +}; + +/* It is possible to indicate to the Yamaha YMF7x3 the source to direct to the S/PDIF output. */ +static int snd_ac97_ymf7x3_spdif_source_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { static char *texts[2] = { "AC-Link", "A/D Converter" };
@@ -268,17 +268,17 @@ static int snd_ac97_ymf753_spdif_source_ return 0; }
-static int snd_ac97_ymf753_spdif_source_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) +static int snd_ac97_ymf7x3_spdif_source_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); unsigned short val;
- val = ac97->regs[AC97_YMF753_DIT_CTRL2]; + val = ac97->regs[AC97_YMF7X3_DIT_CTRL]; ucontrol->value.enumerated.item[0] = (val >> 1) & 1; return 0; }
-static int snd_ac97_ymf753_spdif_source_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) +static int snd_ac97_ymf7x3_spdif_source_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); unsigned short val; @@ -286,7 +286,7 @@ static int snd_ac97_ymf753_spdif_source_ if (ucontrol->value.enumerated.item[0] > 1) return -EINVAL; val = ucontrol->value.enumerated.item[0] << 1; - return snd_ac97_update_bits(ac97, AC97_YMF753_DIT_CTRL2, 0x0002, val); + return snd_ac97_update_bits(ac97, AC97_YMF7X3_DIT_CTRL, 0x0002, val); }
/* The AC'97 spec states that the S/PDIF signal is to be output at pin 48. @@ -311,7 +311,7 @@ static int snd_ac97_ymf753_spdif_output_ struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); unsigned short val;
- val = ac97->regs[AC97_YMF753_DIT_CTRL2]; + val = ac97->regs[AC97_YMF7X3_DIT_CTRL]; ucontrol->value.enumerated.item[0] = (val & 0x0008) ? 2 : (val & 0x0020) ? 1 : 0; return 0; } @@ -325,7 +325,7 @@ static int snd_ac97_ymf753_spdif_output_ return -EINVAL; val = (ucontrol->value.enumerated.item[0] == 2) ? 0x0008 : (ucontrol->value.enumerated.item[0] == 1) ? 0x0020 : 0; - return snd_ac97_update_bits(ac97, AC97_YMF753_DIT_CTRL2, 0x0028, val); + return snd_ac97_update_bits(ac97, AC97_YMF7X3_DIT_CTRL, 0x0028, val); /* The following can be used to direct S/PDIF output to pin 47 (EAPD). snd_ac97_write_cache(ac97, 0x62, snd_ac97_read(ac97, 0x62) | 0x0008); */ } @@ -334,9 +334,9 @@ static const struct snd_kcontrol_new snd { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,NONE) "Source", - .info = snd_ac97_ymf753_spdif_source_info, - .get = snd_ac97_ymf753_spdif_source_get, - .put = snd_ac97_ymf753_spdif_source_put, + .info = snd_ac97_ymf7x3_spdif_source_info, + .get = snd_ac97_ymf7x3_spdif_source_get, + .put = snd_ac97_ymf7x3_spdif_source_put, }, { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, @@ -345,10 +345,10 @@ static const struct snd_kcontrol_new snd .get = snd_ac97_ymf753_spdif_output_pin_get, .put = snd_ac97_ymf753_spdif_output_pin_put, }, - AC97_SINGLE(SNDRV_CTL_NAME_IEC958("",NONE,NONE) "Mute", AC97_YMF753_DIT_CTRL2, 2, 1, 1) -}; - -static int patch_yamaha_ymf753_3d(struct snd_ac97 * ac97) + AC97_SINGLE(SNDRV_CTL_NAME_IEC958("",NONE,NONE) "Mute", AC97_YMF7X3_DIT_CTRL, 2, 1, 1) +}; + +static int patch_yamaha_ymf7x3_3d(struct snd_ac97 * ac97) { struct snd_kcontrol *kctl; int err; @@ -358,9 +358,9 @@ static int patch_yamaha_ymf753_3d(struct strcpy(kctl->id.name, "3D Control - Wide"); kctl->private_value = AC97_SINGLE_VALUE(AC97_3D_CONTROL, 9, 7, 0); snd_ac97_write_cache(ac97, AC97_3D_CONTROL, 0x0000); - if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&snd_ac97_ymf753_controls_speaker, ac97))) < 0) + if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&snd_ac97_ymf7x3_controls_speaker, ac97))) < 0) return err; - snd_ac97_write_cache(ac97, AC97_YMF753_3D_MODE_SEL, 0x0c00); + snd_ac97_write_cache(ac97, AC97_YMF7X3_3D_MODE_SEL, 0x0c00); return 0; }
@@ -374,7 +374,7 @@ static int patch_yamaha_ymf753_post_spdi }
static struct snd_ac97_build_ops patch_yamaha_ymf753_ops = { - .build_3d = patch_yamaha_ymf753_3d, + .build_3d = patch_yamaha_ymf7x3_3d, .build_post_spdif = patch_yamaha_ymf753_post_spdif };