From: Shuming Fan shumingf@realtek.com
ADCDAT pin config sets to output mode in default. And the driver creates the kcontrol to control ADCDAT pin configuration.
Signed-off-by: Shuming Fan shumingf@realtek.com --- sound/soc/codecs/rt1011.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/rt1011.c b/sound/soc/codecs/rt1011.c index f9235764ad32..52c17450d5a0 100644 --- a/sound/soc/codecs/rt1011.c +++ b/sound/soc/codecs/rt1011.c @@ -1029,6 +1029,14 @@ static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc1_1_enum, RT1011_TDM1_SET_3, 6, static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc2_1_enum, RT1011_TDM1_SET_3, 4, rt1011_tdm_adc_swap_select);
+static const char * const rt1011_adcdat_pin_config_select[] = { + "Output", "Input" +}; +static SOC_ENUM_SINGLE_DECL(rt1011_adcdat1_pin_config_enum, RT1011_TDM_TOTAL_SET, 4, + rt1011_adcdat_pin_config_select); +static SOC_ENUM_SINGLE_DECL(rt1011_adcdat2_pin_config_enum, RT1011_TDM_TOTAL_SET, 3, + rt1011_adcdat_pin_config_select); + static void rt1011_reset(struct regmap *regmap) { regmap_write(regmap, RT1011_RESET, 0); @@ -1343,6 +1351,8 @@ static const struct snd_kcontrol_new rt1011_snd_controls[] = { SOC_ENUM("I2S ADC DOUT Mode", rt1011_adc_dout_mode_enum), SOC_ENUM("TDM1 DOUT Length", rt1011_tdm1_dout_len_enum), SOC_ENUM("TDM2 DOUT Length", rt1011_tdm2_dout_len_enum), + SOC_ENUM("ADCDAT1 Pin Config", rt1011_adcdat1_pin_config_enum), + SOC_ENUM("ADCDAT2 Pin Config", rt1011_adcdat2_pin_config_enum),
/* Speaker/Receiver Mode */ SOC_SINGLE_EXT("RECV SPK Mode", SND_SOC_NOPM, 0, 1, 0, @@ -1859,9 +1869,6 @@ static int rt1011_set_tdm_slot(struct snd_soc_dai *dai, RT1011_TDM_I2S_DOCK_EN_1_MASK, tdm_en); snd_soc_component_update_bits(component, RT1011_TDM2_SET_2, RT1011_TDM_I2S_DOCK_EN_2_MASK, tdm_en); - snd_soc_component_update_bits(component, RT1011_TDM_TOTAL_SET, - RT1011_ADCDAT1_PIN_CONFIG | RT1011_ADCDAT2_PIN_CONFIG, - RT1011_ADCDAT1_OUTPUT | RT1011_ADCDAT2_OUTPUT);
snd_soc_dapm_mutex_unlock(dapm); return ret; @@ -2207,6 +2214,11 @@ static void rt1011_calibration_work(struct work_struct *work)
/* initial */ rt1011_reg_init(component); + + /* set ADCDAT to output mode */ + snd_soc_component_update_bits(component, RT1011_TDM_TOTAL_SET, + RT1011_ADCDAT1_PIN_CONFIG | RT1011_ADCDAT2_PIN_CONFIG, + RT1011_ADCDAT1_OUTPUT | RT1011_ADCDAT2_OUTPUT); }
static int rt1011_i2c_probe(struct i2c_client *i2c,