On 05/08/2013 07:04 PM, Fabio Estevam wrote:
From: Fabio Estevam fabio.estevam@freescale.com
sgtl5000 codec does not have a reset line, nor a reset command in software.
After a 'reboot' command in Linux or after pressing the system's reset button the sgtl5000 driver fails to probe:
sgtl5000 0-000a: Device with ID register ffff is not a sgtl5000 sgtl5000 0-000a: ASoC: failed to probe CODEC -19 imx-sgtl5000 sound.12: ASoC: failed to instantiate card -19 imx-sgtl5000 sound.12: snd_soc_register_card failed (-19)
As the sgtl5000 codec did not go through a real reset, we cannot rely on the reg_defaults array, since these are only valid after a clean power-on reset.
To fix this issue, use 'reg_defaults_raw' which tells the regcache driver to actually read the codec registers and then fill the cache.
No, that's not what it does. It will only fill the cache from the hardware, if reg_defaults_raw is NULL and num_reg_defaults_raw is not 0.
Signed-off-by: Fabio Estevam fabio.estevam@freescale.com
sound/soc/codecs/sgtl5000.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 327b443..c59fae8 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -1470,8 +1470,8 @@ static const struct regmap_config sgtl5000_regmap = { .readable_reg = sgtl5000_readable,
.cache_type = REGCACHE_RBTREE,
- .reg_defaults = sgtl5000_reg_defaults,
- .num_reg_defaults = ARRAY_SIZE(sgtl5000_reg_defaults),
- .reg_defaults_raw = sgtl5000_reg_defaults,
- .num_reg_defaults_raw = ARRAY_SIZE(sgtl5000_reg_defaults),
This shouldn't even compile without generating a warning.
};
static int sgtl5000_i2c_probe(struct i2c_client *client,