Many of Samsung's Exynos 4 devices share the same midas-audio driver to handle the codec setup. While most of these devices, including the Midas itself, use the jack detection provided by the WM8994 driver, other devices such as the Samsung Galaxy Tab 3 8.0 (lt01) use two GPIOs and an ADC channel to determine jack insertion, the jack's type, and button presses (for headsets with volume up/down/play buttons).
In the downstream kernel, this behavior is implemented in the sec-jack driver[1], and the per-device settings are configured in *-jack.c files in the mach folder (see e.g. the Tab 3's implementation[2]).
This patchset implements this mechanism in the midas_wm1811.c driver, and adds new DTS options to allow for its configuration. It also enables jack detection for the Samsung Galaxy Tab 3 8.0.
A very similar mechanism was already present in the aries_wm8994.c driver[3]; this implementation heavily borrows from it, though there are a few extra cleanups as well.
Signed-off-by: Artur Weber aweber.kernel@gmail.com
[1] https://github.com/gr8nole/android_kernel_samsung_smdk4x12/blob/lineage-14.1... [2] https://github.com/gr8nole/android_kernel_samsung_smdk4x12/blob/lineage-14.1... [3] https://github.com/torvalds/linux/blob/master/sound/soc/samsung/aries_wm8994...
--- Changes in v4: - Replaced manual regulator toggles with SND_SOC_DAPM_REGULATOR_SUPPLY, both for existing mic bias regulators and for the new headset mic bias regulator - Link to v3: https://lore.kernel.org/r/20240519-midas-wm1811-gpio-jack-v3-0-0c1736144c0e@...
Changes in v3: - Re-added pipe (|) character to samsung,headset-button-threshold-microvolt description to prevent it from being parsed as a mapping (fixes syntax error) - Split out "ASoC: dt-bindings: samsung,midas-audio: Add GPIO-based headset jack detection" into two patches - Link to v2: https://lore.kernel.org/r/20240508-midas-wm1811-gpio-jack-v2-0-b4d36cd02c6e@...
Changes in v2: - Added vendor prefix to threshold properties - Added separate headset mic bias regulator - Changed some cases of dev_err + return with return dev_err_probe - Added an extra patch to replace some previous dev_err + return cases with dev_err_probe - Moved tab3 DTS wm1811 codec config changes to separate commit
--- Artur Weber (9): ASoC: dt-bindings: samsung,midas-audio: Add headset mic bias supply ASoC: dt-bindings: samsung,midas-audio: Add GPIO-based headset jack detection ASoC: samsung: midas_wm1811: Use SND_SOC_DAPM_REGULATOR_SUPPLY for bias regulators ASoC: samsung: midas_wm1811: Add headset mic bias supply support ASoC: samsung: midas_wm1811: Add GPIO-based headset jack detection ASoC: samsung: midas_wm1811: Use dev_err_probe where appropriate ARM: dts: samsung: exynos4212-tab3: Fix headset mic, add jack detection ARM: dts: samsung: exynos4212-tab3: Add MCLK2 clock to WM1811 codec config ARM: dts: samsung: exynos4212-tab3: Drop interrupt from WM1811 codec
.../bindings/sound/samsung,midas-audio.yaml | 33 ++ arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi | 31 +- sound/soc/samsung/Kconfig | 2 +- sound/soc/samsung/midas_wm1811.c | 348 +++++++++++++++++---- 4 files changed, 343 insertions(+), 71 deletions(-) --- base-commit: a38297e3fb012ddfa7ce0321a7e5a8daeb1872b6 change-id: 20240502-midas-wm1811-gpio-jack-b10226b17ecc
Best regards,