From: Shilpa Sreeramalu shilpa.sreeramalu@intel.com
The usage_count variable was read before it was set to the correct value, due to which the firmware load was failing. Because of this IPC messages sent to the firmware were timing out causing a delay of about 1 second while playing audio from the internal speakers.
With this patch the usage_count is read after the function call pm_runtime_get_sync which will increment the usage_count variable and the firmware load is successful and all the IPC messages are processed correctly.
Cc: stable@vger.kernel.org Signed-off-by: Shilpa Sreeramalu shilpa.sreeramalu@intel.com --- sound/soc/intel/atom/sst/sst_drv_interface.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/sound/soc/intel/atom/sst/sst_drv_interface.c b/sound/soc/intel/atom/sst/sst_drv_interface.c index 620da1d..440b953 100644 --- a/sound/soc/intel/atom/sst/sst_drv_interface.c +++ b/sound/soc/intel/atom/sst/sst_drv_interface.c @@ -42,6 +42,11 @@ #define MIN_FRAGMENT_SIZE (50 * 1024) #define MAX_FRAGMENT_SIZE (1024 * 1024) #define SST_GET_BYTES_PER_SAMPLE(pcm_wd_sz) (((pcm_wd_sz + 15) >> 4) << 1) +#ifdef PM_CONFIG +#define GET_USAGE_COUNT(dev) (atomic_read(&dev->power.usage_count)) +#else +#define GET_USAGE_COUNT(dev) 1 +#endif
int free_stream_context(struct intel_sst_drv *ctx, unsigned int str_id) { @@ -141,15 +146,9 @@ static int sst_power_control(struct device *dev, bool state) int ret = 0; int usage_count = 0;
-#ifdef CONFIG_PM - usage_count = atomic_read(&dev->power.usage_count); -#else - usage_count = 1; -#endif - if (state == true) { ret = pm_runtime_get_sync(dev); - + usage_count = GET_USAGE_COUNT(dev); dev_dbg(ctx->dev, "Enable: pm usage count: %d\n", usage_count); if (ret < 0) { dev_err(ctx->dev, "Runtime get failed with err: %d\n", ret); @@ -164,6 +163,7 @@ static int sst_power_control(struct device *dev, bool state) } } } else { + usage_count = GET_USAGE_COUNT(dev); dev_dbg(ctx->dev, "Disable: pm usage count: %d\n", usage_count); return sst_pm_runtime_put(ctx); }