The DMA (PCM) driver used by some Freescale PowerPC supports separate DAIs for playback and capture, so DMA buffers should be allocated only for the initialized streams. Instead of checking for the number of active channels, which apparently is not reliable, check to see if the actual stream object exists.
Also provide a better name for the DMA interrupt.
Signed-off-by: Timur Tabi timur@freescale.com --- sound/soc/fsl/fsl_dma.c | 9 +++++---- 1 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c index 3872598..732208c 100644 --- a/sound/soc/fsl/fsl_dma.c +++ b/sound/soc/fsl/fsl_dma.c @@ -312,7 +312,7 @@ static int fsl_dma_new(struct snd_soc_pcm_runtime *rtd) * should allocate a DMA buffer only for the streams that are valid. */
- if (dai->driver->playback.channels_min) { + if (pcm->streams[0].substream) { ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, card->dev, fsl_dma_hardware.buffer_bytes_max, &pcm->streams[0].substream->dma_buffer); @@ -322,13 +322,13 @@ static int fsl_dma_new(struct snd_soc_pcm_runtime *rtd) } }
- if (dai->driver->capture.channels_min) { + if (pcm->streams[1].substream) { ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, card->dev, fsl_dma_hardware.buffer_bytes_max, &pcm->streams[1].substream->dma_buffer); if (ret) { - snd_dma_free_pages(&pcm->streams[0].substream->dma_buffer); dev_err(card->dev, "can't alloc capture dma buffer\n"); + snd_dma_free_pages(&pcm->streams[0].substream->dma_buffer); return ret; } } @@ -451,7 +451,8 @@ static int fsl_dma_open(struct snd_pcm_substream *substream) dma_private->ld_buf_phys = ld_buf_phys; dma_private->dma_buf_phys = substream->dma_buffer.addr;
- ret = request_irq(dma_private->irq, fsl_dma_isr, 0, "DMA", dma_private); + ret = request_irq(dma_private->irq, fsl_dma_isr, 0, "fsldma-audio", + dma_private); if (ret) { dev_err(dev, "can't register ISR for IRQ %u (ret=%i)\n", dma_private->irq, ret);