W dniu 20.08.2011 09:33, Andrew Mahone pisze:
This laptop is detected as ALC892 audio (and by the codec ID this seems to be valid), but none of the configurations for it quite match this device. I've been working on documenting the connections with HDA Analyzer.
alsa-info output: http://www.alsa-project.org/db/?f=b86e4c6447867fbd129a36d8a63e2f5caa836c52
The laptop has built-in 5.1, and 5.1 or 7.1 output via jacks.
DAC NIDs: 0x02 front 0x03 rear 0x04 clfe 0x05 side
internal mixers: 0x0c front 0x0d rear 0x0e clfe 0x0f side
internal speaker pins: 0x14 front 0x15 "rear" (front of laptop) 0x16 clfe
external ports: fixed route: 0x17 side
can select any output: 0x18 mic / output 0x1a line-in / output 0x1b headphone
I've been experimenting with patch_realtek.c to add the extra DAC NID, and have had some success with a 6-channel mode for the built-in speakers and an 8-channel mode that mutes all internal speakers and sets the jacks up for output. I still need to manually connect pins 0x18, 0x1a, 0x1b to the correct internal mixers for 7.1 to work, and headphone plugin does not mute internal speakers in 5.1 mode. I have not added a plain stereo mode for internal speakers, although it appears that i can probably configure the codec to mix the front channels to center and LFE.
Are there any suggestions for what to do next? My current state as a patch against the linux-3.0.y repository is at http://pastie.org/2400649
I tried this patch (attached a version ported to 3.1.x kernel) with P150HM and I was still unable to get sound out of the subwoofer when on 6 channel mode, could nonexisting rear be interfering? As Andrew said, 8 channel mode works once you manually unmute and reattach mixers using hda-analyzer.
Regards, Julian