Re: [PATCH v3 01/10] dt-bindings: soc: fsl: cpm_qe: Add TSA controller

Hi Rob,

On Tue, 17 Jan 2023 08:55:29 -0600 Rob Herring robh@kernel.org wrote:

On Fri, Jan 13, 2023 at 11:37:50AM +0100, Herve Codina wrote:

...

Add support for the time slot assigner (TSA) available in some PowerQUICC SoC such as MPC885 or MPC866.

An odd line wrap length...

Will be changed in v4.

...

Signed-off-by: Herve Codina herve.codina@bootlin.com

.../bindings/soc/fsl/cpm_qe/fsl,tsa.yaml | 260 ++++++++++++++++++ include/dt-bindings/soc/fsl,tsa.h | 13 + 2 files changed, 273 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml create mode 100644 include/dt-bindings/soc/fsl,tsa.h

diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml new file mode 100644 index 000000000000..eb17b6119abd --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml @@ -0,0 +1,260 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,tsa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#

+title: PowerQUICC CPM Time-slot assigner (TSA) controller

+maintainers:

• • Herve Codina herve.codina@bootlin.com

+description: |

Don't need '|' if no formatting.

Will be changed in v4.

...

• The TSA is the time-slot assigner that can be found on some
• PowerQUICC SoC.
• Its purpose is to route some TDM time-slots to other internal
• serial controllers.

Wrap at 80.

Will be fixed in v4.

...

+properties:

• compatible:
• items:

•  - enum:
  

•      - fsl,mpc885-tsa
  

•      - fsl,mpc866-tsa
  

•  - const: fsl,cpm1-tsa
  

• reg:
• items:

•  - description: SI (Serial Interface) register base
  

•  - description: SI RAM base
  

• reg-names:
• items:

•  - const: si_regs
  

•  - const: si_ram
  

• '#address-cells':
• const: 1
• '#size-cells':
• const: 0

+patternProperties:

• '^tdm@[0-1]$':
• description:

•  The TDM managed by this controller
  

• type: object

   additionalProperties: false

Will be added in v4.

...

• properties:

•  reg:
  

•    minimum: 0
  

•    maximum: 1
  

•    description:
  

•      The TDM number for this TDM, 0 for TDMa and 1 for TDMb
  

•  fsl,common-rxtx-pins:
  

•    $ref: /schemas/types.yaml#/definitions/flag
  

•    description:
  

•      The hardware can use four dedicated pins for Tx clock,
  

•      Tx sync, Rx clock and Rx sync or use only two pins,
  

•      Tx/Rx clock and Rx/Rx sync.
  

•      Without the 'fsl,common-rxtx-pins' property, the four
  

•      pins are used. With the 'fsl,common-rxtx-pins' property,
  

•      two pins are used.
  

•  clocks:
  

•    minItems: 2
  

•    maxItems: 4
  

•  clock-names:
  

•    minItems: 2
  

•    maxItems: 4
  

•  fsl,mode:  
  

'mode' is a bit vague. It's already used as well which can be a problem if there are differing types. (There's not in this case)

What do you think about: fsl,diagnostic-mode: $ref: /schemas/types.yaml#/definitions/string enum: [disabled, echo, internal-loopback, control-loopback] default: disabled description: | The diagnostic mode can be used to diagnose some communication issues. It should not be present (or set to 'disabled') when diagnostic is not needed. Diagnostic mode: - disabled: Diagnostic disabled (ie. normal operation) - echo: Automatic echo. Rx data is resent on Tx - internal-loopback: The TDM transmitter is connected to the receiver. Data appears on Tx pin. - control-loopback: The TDM transmitter is connected to the receiver. The Tx pin is disconnected.

...

•    $ref: /schemas/types.yaml#/definitions/string
  

•    enum: [normal, echo, internal-loopback, control-loopback]
  

•    default: normal
  

•    description: |
  

•      Operational mode:
  

•        - normal:
  

•            Normal operation
  

•        - echo:
  

•            Automatic echo. Rx data is resent on Tx
  

•        - internal-loopback:
  

•            The TDM transmitter is connected to the receiver.
  

•            Data appears on Tx pin.
  

•        - control-loopback:
  

•            The TDM transmitter is connected to the receiver.
  

•            The Tx pin is disconnected.
  

•  fsl,rx-frame-sync-delay-bits:
  

•    enum: [0, 1, 2, 3]
  

•    default: 0
  

•    description: |
  

•      Receive frame sync delay in number of bits.
  

•      Indicates the delay between the Rx sync and the first bit of the
  

•      Rx frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay.
  

•  fsl,tx-frame-sync-delay-bits:
  

•    enum: [0, 1, 2, 3]
  

•    default: 0
  

•    description: |
  

•      Transmit frame sync delay in number of bits.
  

•      Indicates the delay between the Tx sync and the first bit of the
  

•      Tx frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay.
  

•  fsl,clock-falling-edge:
  

•    $ref: /schemas/types.yaml#/definitions/flag
  

•    description: |
  

•      Data is sent on falling edge of the clock (and received on the
  

•      rising edge).
  

•      If 'clock-falling-edge' is not present, data is sent on the
  

•      rising edge (and received on the falling edge).
  

•  fsl,fsync-rising-edge:
  

•    $ref: /schemas/types.yaml#/definitions/flag
  

•    description:
  

•      Frame sync pulses are sampled with the rising edge of the channel
  

•      clock. If 'fsync-rising-edge' is not present, pulses are sample
  

•      with e falling edge.
  

•  fsl,double-speed-clock:
  

•    $ref: /schemas/types.yaml#/definitions/flag
  

•    description:
  

•      The channel clock is twice the data rate.
  

•  fsl,tx-ts-routes:
  

•    $ref: /schemas/types.yaml#/definitions/uint32-matrix
  

•    description: |
  

•      A list of tupple that indicates the Tx time-slots routes.
  

•        tx_ts_routes =
  

•           < 2 0 >, /* The first 2 time slots are not used */
  

•           < 3 1 >, /* The next 3 ones are route to SCC2 */
  

•           < 4 0 >, /* The next 4 ones are not used */
  

•           < 2 2 >; /* The nest 2 ones are route to SCC3 */
  

•    items:
  

•      items:
  

•        - description:
  

•            The number of time-slots
  

•          minimum: 1
  

•          maximum: 64
  

•        - description: |
  

•            The source serial interface (dt-bindings/soc/fsl,tsa.h
  

•            defines these values)
  

•             - 0: No destination
  

•             - 1: SCC2
  

•             - 2: SCC3
  

•             - 3: SCC4
  

•             - 4: SMC1
  

•             - 5: SMC2
  

•          enum: [0, 1, 2, 3, 4, 5]
  

•    minItems: 1
  

•    maxItems: 64
  

•  fsl,rx-ts-routes:
  

•    $ref: /schemas/types.yaml#/definitions/uint32-matrix
  

•    description: |
  

•      A list of tupple that indicates the Rx time-slots routes.
  

•        tx_ts_routes =
  

•           < 2 0 >, /* The first 2 time slots are not used */
  

•           < 3 1 >, /* The next 3 ones are route from SCC2 */
  

•           < 4 0 >, /* The next 4 ones are not used */
  

•           < 2 2 >; /* The nest 2 ones are route from SCC3 */
  

•    items:
  

•      items:
  

•        - description:
  

•            The number of time-slots
  

•          minimum: 1
  

•          maximum: 64
  

•        - description: |
  

•            The destination serial interface (dt-bindings/soc/fsl,tsa.h
  

•            defines these values)
  

•             - 0: No destination
  

•             - 1: SCC2
  

•             - 2: SCC3
  

•             - 3: SCC4
  

•             - 4: SMC1
  

•             - 5: SMC2
  

•          enum: [0, 1, 2, 3, 4, 5]
  

•    minItems: 1
  

•    maxItems: 64
  

• allOf:

•  # If fsl,common-rxtx-pins is present, only 2 clocks are needed.
  

•  # Else, the 4 clocks must be present.
  

•  - if:
  

•      required:
  

•        - fsl,common-rxtx-pins
  

•    then:
  

•      properties:
  

•        clocks:
  

•          items:
  

•            - description: External clock connected to L1RSYNC pin
  

•            - description: External clock connected to L1RCLK pin
  

•        clock-names:
  

•          items:
  

•            - const: l1rsync
  

•            - const: l1rclk
  

•    else:
  

•      properties:
  

•        clocks:
  

•          items:
  

•            - description: External clock connected to L1RSYNC pin
  

•            - description: External clock connected to L1RCLK pin
  

•            - description: External clock connected to L1TSYNC pin
  

•            - description: External clock connected to L1TCLK pin
  

•        clock-names:
  

•          items:
  

•            - const: l1rsync
  

•            - const: l1rclk
  

•            - const: l1tsync
  

•            - const: l1tclk  
  

As the names are the same, just the length varies between 2 or 4, move all this to the main definition and here just put constraints on the length.

Ok, will be done in v4.

...

• required:

•  - reg
  

•  - clocks
  

•  - clock-names
  

+required:

• • compatible
• • reg
• • reg-names
• • '#address-cells'
• • '#size-cells'

+additionalProperties: false

+examples:

• • |
• #include <dt-bindings/soc/fsl,tsa.h>
• tsa@ae0 {

•    compatible = "fsl,mpc885-tsa", "fsl,cpm1-tsa";
  

•    reg = <0xae0 0x10>,
  

•          <0xc00 0x200>;
  

•    reg-names = "si_regs", "si_ram";
  

•    #address-cells = <1>;
  

•    #size-cells = <0>;
  

•    tdm@0 {
  

•        /* TDMa */
  

•        reg = <0>;
  

•        clocks = <&clk_l1rsynca>, <&clk_l1rclka>;
  

•        clock-names = "l1rsync", "l1rclk";
  

•        fsl,common-rxtx-pins;
  

•        fsl,fsync-rising-edge;
  

•        fsl,tx-ts-routes = < 2 0 >,             /* TS 0..1 */
  

•                       < 24 FSL_CPM_TSA_SCC4 >, /* TS 2..25 */
  

•                       < 1 0 >,                 /* TS 26 */
  

•                       < 5 FSL_CPM_TSA_SCC3 >;  /* TS 27..31 */
  

•        fsl,rx-ts-routes = < 2 0 >,             /* TS 0..1 */
  

•                       < 24 FSL_CPM_TSA_SCC4 >, /* 2..25 */
  

•                       < 1 0 >,                 /* TS 26 */
  

•                       < 5 FSL_CPM_TSA_SCC3 >;  /* TS 27..31 */
  

•    };
  

• };

diff --git a/include/dt-bindings/soc/fsl,tsa.h b/include/dt-bindings/soc/fsl,tsa.h new file mode 100644 index 000000000000..2cc44e867dbe --- /dev/null +++ b/include/dt-bindings/soc/fsl,tsa.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */

+#ifndef __DT_BINDINGS_SOC_FSL_TSA_H +#define __DT_BINDINGS_SOC_FSL_TSA_H

+#define FSL_CPM_TSA_NU 0 /* Pseuso Cell Id for not used item */ +#define FSL_CPM_TSA_SCC2 1 +#define FSL_CPM_TSA_SCC3 2 +#define FSL_CPM_TSA_SCC4 3 +#define FSL_CPM_TSA_SMC1 4 +#define FSL_CPM_TSA_SMC2 5

+#endif

2.38.1

Thanks for the review,

Hervé