Re: [alsa-devel] [PATCH v2 2/2] dt: binding: sound cs42l52 driver

...

+Required properties:

• • compatible : "cirrus,cs42l52"
• • reg : the I2C address of the device for I2C

+Optional properties:

• • reset-gpio : GPIO controller's phandle and the number

•  of the GPIO used to reset the codec.
  

• • chgfreq : Charge Pump Frequency values. Allowable values of

•  0x00 through 0x0F.
  

•  Frequency = (64xFs)/(N+2)
  

• • mica-cfg : MIC A single-ended or differential select.

•  0x00 = Single-Ended
  

•  0x01 = Differential
  

• • micb-cfg : MIC B single-ended or differential select.

•  0x00 = Single-Ended
  

•  0x01 = Differential
  

• • mica-sel : MIC A single ended input select. For Single-Ended

•  configuration, select which MIC to use.
  

•  0x00 = MIC1
  

•  0x01 = MIC2
  

• • micb-sel : MIC B single ended input select. For Single-Ended

•  configuration, select which MIC to use.
  

•  0x00 = MIC1
  

•  0x01 = MIC2
  

• • micbias-lvl: Set the output voltage level on the MICBIAS Pin

•  0x00 = 0.5 x VA
  

•  0x01 = 0.6 x VA
  

•  0x02 = 0.7 x VA
  

•  0x03 = 0.8 x VA
  

•  0x04 = 0.83 x VA
  

•  0x05 = 0.91 x VA
  

these properties should be cirrus, prefixed.

This is for a Cirrus CODEC, not related to the Cirrus ARM9. I didn't think we would prefix for a binding on a codec. I thought that was only for SOC/Platforms