On Wed, Feb 17, 2016 at 04:49:05PM +0200, Jyri Sarha wrote:
From: Jean-Francois Moine moinejf@free.fr
Two kinds of ports may be declared in a DT graph of ports: video and audio. This patch accepts the port value from a video port as an alternative to the video-ports property. It also accepts audio ports in the case the transmitter is not used as a slave encoder. The new file include/sound/tda998x.h prepares to the definition of a tda998x CODEC.
Signed-off-by: Jean-Francois Moine moinejf@free.fr Signed-off-by: Jyri Sarha jsarha@ti.com
.../devicetree/bindings/display/bridge/tda998x.txt | 51 ++++++++++++ drivers/gpu/drm/i2c/tda998x_drv.c | 90 +++++++++++++++++++--- include/sound/tda998x.h | 8 ++ 3 files changed, 140 insertions(+), 9 deletions(-) create mode 100644 include/sound/tda998x.h
diff --git a/Documentation/devicetree/bindings/display/bridge/tda998x.txt b/Documentation/devicetree/bindings/display/bridge/tda998x.txt index e9e4bce..35f6a80 100644 --- a/Documentation/devicetree/bindings/display/bridge/tda998x.txt +++ b/Documentation/devicetree/bindings/display/bridge/tda998x.txt @@ -16,6 +16,35 @@ Optional properties:
- video-ports: 24 bits value which defines how the video controller
output is wired to the TDA998x input - default: <0x230145>
- This property is not used when ports are defined.
+Optional nodes:
- port: up to three ports.
- The ports are defined according to [1].
- Video port.
- There may be only one video port.
- This one must contain the following property:
- port-type: must be "rgb"
This should be implied from the port unit address. In other words, port@0 is defined to be the rgb port. Now, if this is one of several modes for the video port, then that is a different story.
- and may contain the optional property:
- reg: 24 bits value which defines how the video controller
output is wired to the TDA998x input (video pins)When absent, the default value is <0x230145>.
This is not really how reg is intended to be used. Can you explain how this value is determined?
- Audio ports.
- There may be one or two audio ports.
- These ones must contain the following properties:
- port-type: must be "i2s" or "spdif"
- reg: 8 bits value which defines how the audio controller
output is wired to the TDA998x input (audio pins)
Same here.
Rob