On 31-03-22, 08:49, Sascha Hauer wrote:
On Thu, Mar 31, 2022 at 10:56:09AM +0530, Vinod Koul wrote:
On 28-03-22, 13:27, Sascha Hauer wrote:
Signed-off-by: Sascha Hauer s.hauer@pengutronix.de
it is dmaengine: xxx
Ok.
Also is this patch dependent on rest of the series, if not consider sending separately
The rest of this series indeed depends on this patch.
diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h index 281adbb26e6bd..4a43a048e1b4d 100644 --- a/include/linux/platform_data/dma-imx.h +++ b/include/linux/platform_data/dma-imx.h @@ -39,6 +39,7 @@ enum sdma_peripheral_type { IMX_DMATYPE_SSI_DUAL, /* SSI Dual FIFO */ IMX_DMATYPE_ASRC_SP, /* Shared ASRC */ IMX_DMATYPE_SAI, /* SAI */
- IMX_DMATYPE_MULTI_SAI, /* MULTI FIFOs For Audio */
};
enum imx_dma_prio { @@ -65,4 +66,10 @@ static inline int imx_dma_is_general_purpose(struct dma_chan *chan) !strcmp(chan->device->dev->driver->name, "imx-dma"); }
+struct sdma_peripheral_config {
- int n_fifos_src;
- int n_fifos_dst;
- bool sw_done;
+};
Not more platform data :(
I'm not sure what you are referring to as platform_data. This is not the classical platform_data that is attached to a platform_device to configure behaviour of that device. It is rather data that needs to be communicated from the clients of the SDMA engine to the SDMA engine.
I have put this into include/linux/platform_data/dma-imx.h because that's the only existing include file that is available. I could move this to a new file if you like that better.
Lets move to include/linux/dma/
Can you explain this structure and why this is required? What do these fields refer to..?
The reasoning for this structure is described in the commit message that I have forgotten:
The i.MX SDMA engine can read from / write to multiple successive hardware FIFO registers, referred to as "Multi FIFO support". This is needed for the micfil driver and certain configurations of the SAI driver. This patch adds support for this feature. The number of FIFOs to read from / write to must be communicated from the client driver to the SDMA engine. For this the struct dma_slave_config::peripheral_config field is used.I can describe the individual fields of struct sdma_peripheral_config in the header file if that's your point.
So you need to know the number of fifo right, what does sw_done imply?
Also if this is hardware information, why not use dma-cells for this?