From: Srinivas Kandagatla srinivas.kandagatla@linaro.org
This patch adds support to set_sysclk() which can let the sound card driver to set default mclk rate. In this case MCLK for internal audio codec is expected to be at 9.6MHz by default.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org --- sound/soc/codecs/msm8916-wcd-digital.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/sound/soc/codecs/msm8916-wcd-digital.c b/sound/soc/codecs/msm8916-wcd-digital.c index f690442..825cc7d 100644 --- a/sound/soc/codecs/msm8916-wcd-digital.c +++ b/sound/soc/codecs/msm8916-wcd-digital.c @@ -568,6 +568,15 @@ static int msm8916_wcd_digital_codec_probe(struct snd_soc_codec *codec) return 0; }
+static int msm8916_wcd_digital_codec_set_sysclk(struct snd_soc_codec *codec, + int clk_id, int source, + unsigned int freq, int dir) +{ + struct msm8916_wcd_digital_priv *p = dev_get_drvdata(codec->dev); + + return clk_set_rate(p->mclk, freq); +} + static int msm8916_wcd_digital_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) @@ -823,6 +832,7 @@ static struct snd_soc_dai_driver msm8916_wcd_digital_dai[] = {
static struct snd_soc_codec_driver msm8916_wcd_digital = { .probe = msm8916_wcd_digital_codec_probe, + .set_sysclk = msm8916_wcd_digital_codec_set_sysclk, .component_driver = { .controls = msm8916_wcd_digital_snd_controls, .num_controls = ARRAY_SIZE(msm8916_wcd_digital_snd_controls),