Angel Tsankov wrote:
Raymond Yau wrote:
2010/2/27 Angel Tsankov fn42551@fmi.uni-sofia.bg
Raymond Yau wrote:
2010/2/26 Angel Tsankov fn42551@fmi.uni-sofia.bg
Raymond Yau wrote:
2010/2/25 Jaroslav Kysela perex@perex.cz
On Thu, 25 Feb 2010, Angel Tsankov wrote: > Jaroslav Kysela wrote: >>> On Thu, 25 Feb 2010, Angel Tsankov wrote: >>> >>> Hello, >>>> I run 'alsactl restore' on a machine with 2 sound cards -- a >>>> built-in >>>> Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller >>>> (rev >>>> 02) and a non-built-in Yamaha Corporation YMF-724F [DS-1 Audio >>>> Controller] (rev 03) -- and get the following message: >>>> >>>> Unknown hardware: "YMF724F" "SigmaTel STAC9700,83,84" >>>> >>> "AC97a:83847600" "0x1073" "0x000d" >>>> Hardware is initialized using a guess method >>>> >>>> As a consequence the volume levels of the Yamaha card do not get >>>> restored to the levels stored in /etc/asound.state. The volume >>>> >>> levels of the built-in card however are properly restored. The asound.state >>>> file has been created by executing 'alsactl store'. >>>> >>>> The kernel has been built with support for ALSA. I've built and >>>> installed the kernel modules for both cards (not the ones in the >>>> alsa-driver package but those that come with kernel version >>>> >>> 2.6.30.2). Any ideas why alsactl cannot find the hardware it has previously >>>> identified as "YMF724F", "SigmaTel STAC9700,83,84", and so on? >>>> >>> The logic of alsactl is to restore the state from /etc/asound.state >>> if >>> >> it >> is valid. It seems like the set_controls() function in alsactl/state.c >>> returns an error code for a reason. >>> >>> Could you try to compile the latest alsa-utils snapshot >>> (http://www.alsa-project.org/snapshot/) and run './alsactl -d >>> >> restore' in >> alsa-utils/alsactl directory? A warning (fail reason) should be >> printed. I've attached a bash shell script that I used to download, configure, >> compile, and run alsactl. I've also attached a .log file with stdout >> > and stderr that I got while executing the script. > Thanks. I've added more debug print lines to state.c. Could you rerun > your script and append also '/etc/asound.state' file and output from > 'alsa-info.sh --no-upload' to your output tarballs? Send me this > tarball > privately or just an URL to this list. > > Thanks, > Jaroslav > > > did alsactl restore those IFACE_PCM volume since they are supposed at 0dB
by
default whenever the subdevice is open ?
store the values in asound.state seem to be for debugging only
control.61 { comment.access 'read write inactive' comment.type INTEGER comment.count 2 comment.range '0 - 32768' iface PCM subdevice 1 name 'PCM Playback Volume' value.0 26214 value.1 26214 }
In fact, alsactl seems to restore the volume levels (despite the "Unknown hardware" message) when the system is up and running, but it does not restore the PCM and master levels at boot time. This should be done when the hardware is detected by udev, as I have the following udev rule:
KERNEL=="controlC[0-9]*", ACTION=="add", RUN+="/usr/sbin/alsactl restore %n"
Angel Tsankov
Can you store the iface PCM "PCM Playback Volume" in asound.state while
you are playing audio ?
alsactl can store the value since the control is active when the subdevice is open
alsactl already skip restoring of those control when it is not active , so the problem seem not related to those controls
However via82xx also have those hardware specific controls
It seems that when I store the values while the sound card is playing I get one more control in asound.state (see attached archive).
Here's the test I did:
- I removed /etc/asound.state (just in case);
- I made sure the sound card is not playing, ran 'alsactl store', and
renamed /etc/asound.state to /etc/asound.state.not-playing; 3. I started vlc, played some music, ran 'alsactl store' once again, and renamed /etc/asound.state to /etc/asound.state.playing;
Then I diff'ed the two files and found out that they are different. I'm sending them as alsactl created them.
Regards, Angel Tsankov
This is the extra control saved when you are playing audio on subdevice 0
control.48 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 32768' iface PCM name 'PCM Playback Volume' value.0 32768 value.1 32768 }This look like there is any sound (login/system boot event sound) playing when you perform alsactl restore , the driver will contain more control than state file , it will not restore but perform initialization
Here's another test I performed. I created a new /etc/asound.state while vlc was playing some music. Then I made sure that control.48 is in the file and ensured the file won't be overridden at system shutdown. Then I restarted the system, verified that the file's time stamp has not been changed and started Xfce's mixer only to discover that neither PCM, nor master volume was restored to its saved state. Rather, they looked more like initialized.
I'd also like to point out that in /etc/asound.state the values for control.48 are the maximum possible (if I interpret the values right), but when I stored the levels neither master, nor PCM was set to its maximum value.
Now, one test more. While playing some music I ran 'alsactl restore' and both master and PCM levels were restored to the saved values.
Stil another test. While *not* playing anything I changed the master and PCM levels and ran 'alactl restore' and guess what... the levels were restored to their saved values!
Some additional info: I performed the above tests with an /etc/asound.state file created while nothing is being played and which did not have control.48 in it and I got the same results -- the master and PCM levels were restored regardless of whether anything is being played when I ran 'aslactl restore'.
Maybe the problem does not have anything to do with whether anything is being played while the levels are being restored or not and I still suspect that something might be wrong in my shutdown, or more likely -- boot-up, settings...
Now my suspicion seems more logically sound.
Angel Tsankov