Many devices with a single alternate setting do not have a Valid Alternate Setting Control and validation performed by validate_sample_rate_table_v2v3() doesn't work on them and is not really needed. So check the presense of control before sending altsetting validation requests.
MOTU Microbook IIc is suffering the most without this check. It takes up to 40 seconds to bootup due to how slow it switches sampling rates:
[ 2659.164824] usb 3-2: New USB device found, idVendor=07fd, idProduct=0004, bcdDevice= 0.60 [ 2659.164827] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2659.164829] usb 3-2: Product: MicroBook IIc [ 2659.164830] usb 3-2: Manufacturer: MOTU [ 2659.166204] usb 3-2: Found last interface = 3 [ 2679.322298] usb 3-2: No valid sample rate available for 1:1, assuming a firmware bug [ 2679.322306] usb 3-2: 1:1: add audio endpoint 0x3 [ 2679.322321] usb 3-2: Creating new data endpoint #3 [ 2679.322552] usb 3-2: 1:1 Set sample rate 96000, clock 1 [ 2684.362250] usb 3-2: 2:1: cannot get freq (v2/v3): err -110 [ 2694.444700] usb 3-2: No valid sample rate available for 2:1, assuming a firmware bug [ 2694.444707] usb 3-2: 2:1: add audio endpoint 0x84 [ 2694.444721] usb 3-2: Creating new data endpoint #84 [ 2699.482103] usb 3-2: 2:1 Set sample rate 96000, clock 1
Signed-off-by: Alexander Tsoy alexander@tsoy.me --- sound/usb/format.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
diff --git a/sound/usb/format.c b/sound/usb/format.c index ab5fed9f55b6..3b45d0ee7693 100644 --- a/sound/usb/format.c +++ b/sound/usb/format.c @@ -470,9 +470,11 @@ static int validate_sample_rate_table_v2v3(struct snd_usb_audio *chip, int clock) { struct usb_device *dev = chip->dev; + struct usb_host_interface *alts; unsigned int *table; unsigned int nr_rates; int i, err; + u32 bmControls;
/* performing the rate verification may lead to unexpected USB bus * behavior afterwards by some unknown reason. Do this only for the @@ -481,6 +483,24 @@ static int validate_sample_rate_table_v2v3(struct snd_usb_audio *chip, if (!(chip->quirk_flags & QUIRK_FLAG_VALIDATE_RATES)) return 0; /* don't perform the validation as default */
+ alts = snd_usb_get_host_interface(chip, fp->iface, fp->altsetting); + if (!alts) + return 0; + + if (fp->protocol == UAC_VERSION_3) { + struct uac3_as_header_descriptor *as = snd_usb_find_csint_desc( + alts->extra, alts->extralen, NULL, UAC_AS_GENERAL); + bmControls = le32_to_cpu(as->bmControls); + } else { + struct uac2_as_header_descriptor *as = snd_usb_find_csint_desc( + alts->extra, alts->extralen, NULL, UAC_AS_GENERAL); + bmControls = as->bmControls; + } + + if (!uac_v2v3_control_is_readable(bmControls, + UAC2_AS_VAL_ALT_SETTINGS)) + return 0; + table = kcalloc(fp->nr_rates, sizeof(*table), GFP_KERNEL); if (!table) return -ENOMEM;