At Mon, 02 Mar 2015 19:37:12 -0800, Alnie wrote:
At Wed, 25 Feb 2015 00:21:15 -0800, Alnie wrote:
On 02/25/2015 12:06 AM, Takashi Iwai wrote:
At Tue, 24 Feb 2015 23:55:25 -0800, Alnie wrote:
[ 2619.199658] pciehp 0000:00:1c.3:pcie04: Card not present on Slot(3) [ 2619.199666] pciehp 0000:00:1c.3:pcie04: slot(3): Link Down event [ 2619.199674] pciehp 0000:00:1c.3:pcie04: Link Down event ignored on slot(3): already powering off [ 2619.199911] pci_bus 0000:06: busn_res: [bus 06-0c] is released [ 2620.757928] pciehp 0000:00:1c.3:pcie04: Card present on Slot(3) [ 2620.767950] pciehp 0000:00:1c.3:pcie04: slot(3): Link Up event [ 2620.767985] pciehp 0000:00:1c.3:pcie04: Link Up event ignored on slot(3): already powering on
pciehp reacted power off and on here, and...
[ 2620.876160] pci 0000:05:00.0: [1102:7006] type 01 class 0x060400 [ 2620.876426] pci 0000:05:00.0: supports D1 D2 [ 2620.876719] pci 0000:05:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2620.876928] pci_bus 0000:06: busn_res: can not insert [bus 06-ff] under [bus 05-0c] (conflicts with (null) [bus 05-0c])
.... and something failed here for the PCI bridge device.
[ 2620.876967] pci 0000:06:00.0: [1102:0009] type 00 class 0x040300 [ 2620.877013] pci 0000:06:00.0: reg 0x10: [mem 0x00000000-0x00003fff] [ 2620.877203] pci 0000:06:00.0: supports D1 D2 [ 2620.877443] pci 0000:05:00.0: PCI bridge to [bus 06-ff] [ 2620.877462] pci 0000:05:00.0: bridge window [io 0x0000-0x0fff] [ 2620.877474] pci 0000:05:00.0: bridge window [mem
0x00000000-0x000fffff]
[ 2620.877492] pci 0000:05:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 2620.877500] pci_bus 0000:06: busn_res: [bus 06-ff] end is
updated to 06
[ 2620.877559] pci 0000:05:00.0: BAR 14: assigned [mem 0xf4300000-0xf43fffff] [ 2620.877568] pci 0000:05:00.0: BAR 15: assigned [mem 0xf4000000-0xf40fffff 64bit pref] [ 2620.877574] pci 0000:05:00.0: BAR 13: assigned [io 0x2000-0x2fff] [ 2620.877582] pci 0000:06:00.0: BAR 0: assigned [mem
0xf4300000-0xf4303fff]
[ 2620.877595] pci 0000:05:00.0: PCI bridge to [bus 06] [ 2620.877603] pci 0000:05:00.0: bridge window [io 0x2000-0x2fff] [ 2620.877618] pci 0000:05:00.0: bridge window [mem
0xf4300000-0xf43fffff]
[ 2620.877630] pci 0000:05:00.0: bridge window [mem 0xf4000000-0xf40fffff 64bit pref] [ 2620.877647] pcieport 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 2620.877655] pcieport 0000:00:1c.3: bridge window [io
0x2000-0x2fff]
[ 2620.877667] pcieport 0000:00:1c.3: bridge window [mem 0xf4300000-0xf7efffff] [ 2620.877677] pcieport 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff 64bit pref] [ 2620.877990] pci 0000:05:00.0: enabling device (0000 -> 0003) [ 2620.878013] snd_hda_intel 0000:06:00.0: enabling device (0000
-> 0002)
[ 2620.882747] azx_single_wait_for_response: 108 callbacks suppressed [ 2620.882753] snd_hda_intel 0000:06:00.0: Codec #1 probe error; disabling it... [ 2620.887052] snd_hda_intel 0000:06:00.0: no AFG or MFG node found [ 2620.887058] snd_hda_intel 0000:06:00.0: no codecs initialized
What if you once unload snd-hda-intel module and reload again while keeping the card plugged? I guess it still doesn't work, but just to be sure...
Overall, this look more like a problem of PCI core stuff. Better to toss the issue to PCI people.
Takashi
I did alsa force-reload and the same error comes up. Do you know of a good starting point for presenting PCI issues?
Ask on linux-pci at vger.kernel.org ?
Takashi
Bjorn has suggested it is not a PCI issue... http://article.gmane.org/gmane.linux.kernel.pci/39492 Any other ideas in regards to this?
After re-inserting the card, try to reload the driver module again.
Takashi