The common reserved-memory bindings have recently been copied from the kernel tree into dtschema. The preference is to host common, stable bindings in dtschema. As reserved-memory is documented in the DT Spec, it meets the criteria.
The v2023.09 version of dtschema is what contains the reserved-memory schemas we depend on, so bump the minimum version to that. Otherwise, references to these schemas will generate errors.
Signed-off-by: Rob Herring robh@kernel.org --- Documentation/devicetree/bindings/Makefile | 2 +- .../remoteproc/renesas,rcar-rproc.yaml | 2 +- .../bindings/reserved-memory/framebuffer.yaml | 52 ----- .../reserved-memory/memory-region.yaml | 40 ---- .../reserved-memory/reserved-memory.txt | 2 +- .../reserved-memory/reserved-memory.yaml | 181 ------------------ .../reserved-memory/shared-dma-pool.yaml | 97 ---------- .../bindings/sound/mediatek,mt8188-afe.yaml | 2 +- 8 files changed, 4 insertions(+), 374 deletions(-) delete mode 100644 Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml delete mode 100644 Documentation/devicetree/bindings/reserved-memory/memory-region.yaml delete mode 100644 Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml delete mode 100644 Documentation/devicetree/bindings/reserved-memory/shared-dma-pool.yaml
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index 8b395893bd85..3e886194b043 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -6,7 +6,7 @@ DT_MK_SCHEMA ?= dt-mk-schema DT_SCHEMA_LINT = $(shell which yamllint || \ echo "warning: python package 'yamllint' not installed, skipping" >&2)
-DT_SCHEMA_MIN_VERSION = 2022.3 +DT_SCHEMA_MIN_VERSION = 2023.9
PHONY += check_dtschema_version check_dtschema_version: diff --git a/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml index 4bea679a0f61..5c280117dc93 100644 --- a/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml @@ -31,7 +31,7 @@ properties: remoteproc device. This is variable and describes the memories shared with the remote processor (e.g. remoteproc firmware and carveouts, rpmsg vrings, ...). - (see ../reserved-memory/reserved-memory.yaml) + (see reserved-memory/reserved-memory.yaml in dtschema project)
required: - compatible diff --git a/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml b/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml deleted file mode 100644 index 851ec24d6142..000000000000 --- a/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml +++ /dev/null @@ -1,52 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/reserved-memory/framebuffer.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: /reserved-memory framebuffer node - -maintainers: - - devicetree-spec@vger.kernel.org - -allOf: - - $ref: reserved-memory.yaml - -properties: - compatible: - const: framebuffer - description: > - This indicates a region of memory meant to be used as a framebuffer for - a set of display devices. It can be used by an operating system to keep - the framebuffer from being overwritten and use it as the backing memory - for a display device (such as simple-framebuffer). - -unevaluatedProperties: false - -examples: - - | - / { - compatible = "foo"; - model = "foo"; - #address-cells = <1>; - #size-cells = <1>; - - chosen { - framebuffer { - compatible = "simple-framebuffer"; - memory-region = <&fb>; - }; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - fb: framebuffer@80000000 { - compatible = "framebuffer"; - reg = <0x80000000 0x007e9000>; - }; - }; - }; -... diff --git a/Documentation/devicetree/bindings/reserved-memory/memory-region.yaml b/Documentation/devicetree/bindings/reserved-memory/memory-region.yaml deleted file mode 100644 index 592f180e6b0d..000000000000 --- a/Documentation/devicetree/bindings/reserved-memory/memory-region.yaml +++ /dev/null @@ -1,40 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/reserved-memory/memory-region.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Reserved Memory Region - -maintainers: - - devicetree-spec@vger.kernel.org - -description: | - Regions in the /reserved-memory node may be referenced by other device - nodes by adding a memory-region property to the device node. - -select: true - -properties: - memory-region: - $ref: /schemas/types.yaml#/definitions/phandle-array - description: > - Phandle to a /reserved-memory child node assigned to the device. - - memory-region-names: - $ref: /schemas/types.yaml#/definitions/string-array - description: > - A list of names, one for each corresponding entry in the - memory-region property - -additionalProperties: true - -examples: - - | - fb0: video@12300000 { - /* ... */ - reg = <0x12300000 0x1000>; - memory-region = <&display_reserved>; - }; - -... diff --git a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt index 1810701a8509..8ce72996d500 100644 --- a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt +++ b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt @@ -1 +1 @@ -This file has been moved to reserved-memory.yaml. +This file has been moved to reserved-memory.yaml in the dtschema repository. diff --git a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml deleted file mode 100644 index c680e397cfd2..000000000000 --- a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml +++ /dev/null @@ -1,181 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/reserved-memory/reserved-memory.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: /reserved-memory Child Node Common - -maintainers: - - devicetree-spec@vger.kernel.org - -description: > - Reserved memory is specified as a node under the /reserved-memory node. The - operating system shall exclude reserved memory from normal usage one can - create child nodes describing particular reserved (excluded from normal use) - memory regions. Such memory regions are usually designed for the special - usage by various device drivers. - - Each child of the reserved-memory node specifies one or more regions - of reserved memory. Each child node may either use a 'reg' property to - specify a specific range of reserved memory, or a 'size' property with - optional constraints to request a dynamically allocated block of - memory. - - Following the generic-names recommended practice, node names should - reflect the purpose of the node (ie. "framebuffer" or "dma-pool"). - Unit address (@<address>) should be appended to the name if the node - is a static allocation. - -properties: - reg: true - - size: - oneOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - $ref: /schemas/types.yaml#/definitions/uint64 - description: > - Length based on parent's #size-cells. Size in bytes of memory to - reserve. - - alignment: - oneOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - $ref: /schemas/types.yaml#/definitions/uint64 - description: > - Length based on parent's #size-cells. Address boundary for - alignment of allocation. - - alloc-ranges: - $ref: /schemas/types.yaml#/definitions/uint32-array - description: > - Address and Length pairs. Specifies regions of memory that are - acceptable to allocate from. - - iommu-addresses: - $ref: /schemas/types.yaml#/definitions/phandle-array - description: > - A list of phandle and specifier pairs that describe static IO virtual - address space mappings and carveouts associated with a given reserved - memory region. The phandle in the first cell refers to the device for - which the mapping or carveout is to be created. - - The specifier consists of an address/size pair and denotes the IO - virtual address range of the region for the given device. The exact - format depends on the values of the "#address-cells" and "#size-cells" - properties of the device referenced via the phandle. - - When used in combination with a "reg" property, an IOVA mapping is to - be established for this memory region. One example where this can be - useful is to create an identity mapping for physical memory that the - firmware has configured some hardware to access (such as a bootsplash - framebuffer). - - If no "reg" property is specified, the "iommu-addresses" property - defines carveout regions in the IOVA space for the given device. This - can be useful if a certain memory region should not be mapped through - the IOMMU. - - no-map: - type: boolean - description: > - Indicates the operating system must not create a virtual mapping - of the region as part of its standard mapping of system memory, - nor permit speculative access to it under any circumstances other - than under the control of the device driver using the region. - - reusable: - type: boolean - description: > - The operating system can use the memory in this region with the - limitation that the device driver(s) owning the region need to be - able to reclaim it back. Typically that means that the operating - system can use that region to store volatile or cached data that - can be otherwise regenerated or migrated elsewhere. - -allOf: - - if: - required: - - no-map - - then: - not: - required: - - reusable - - - if: - required: - - reusable - - then: - not: - required: - - no-map - -oneOf: - - oneOf: - - required: - - reg - - - required: - - size - - - oneOf: - # IOMMU reservations - - required: - - iommu-addresses - - # IOMMU mappings - - required: - - reg - - iommu-addresses - -additionalProperties: true - -examples: - - | - / { - compatible = "foo"; - model = "foo"; - - #address-cells = <2>; - #size-cells = <2>; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - adsp_resv: reservation-adsp { - /* - * Restrict IOVA mappings for ADSP buffers to the 512 MiB region - * from 0x40000000 - 0x5fffffff. Anything outside is reserved by - * the ADSP for I/O memory and private memory allocations. - */ - iommu-addresses = <&adsp 0x0 0x00000000 0x00 0x40000000>, - <&adsp 0x0 0x60000000 0xff 0xa0000000>; - }; - - fb: framebuffer@90000000 { - reg = <0x0 0x90000000 0x0 0x00800000>; - iommu-addresses = <&dc0 0x0 0x90000000 0x0 0x00800000>; - }; - }; - - bus@0 { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x0 0x40000000>; - - adsp: adsp@2990000 { - reg = <0x2990000 0x2000>; - memory-region = <&adsp_resv>; - }; - - dc0: display@15200000 { - reg = <0x15200000 0x10000>; - memory-region = <&fb>; - }; - }; - }; -... diff --git a/Documentation/devicetree/bindings/reserved-memory/shared-dma-pool.yaml b/Documentation/devicetree/bindings/reserved-memory/shared-dma-pool.yaml deleted file mode 100644 index 457de0920cd1..000000000000 --- a/Documentation/devicetree/bindings/reserved-memory/shared-dma-pool.yaml +++ /dev/null @@ -1,97 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/reserved-memory/shared-dma-pool.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: /reserved-memory DMA pool - -maintainers: - - devicetree-spec@vger.kernel.org - -allOf: - - $ref: reserved-memory.yaml - -properties: - compatible: - oneOf: - - const: shared-dma-pool - description: > - This indicates a region of memory meant to be used as a shared - pool of DMA buffers for a set of devices. It can be used by an - operating system to instantiate the necessary pool management - subsystem if necessary. - - - const: restricted-dma-pool - description: > - This indicates a region of memory meant to be used as a pool - of restricted DMA buffers for a set of devices. The memory - region would be the only region accessible to those devices. - When using this, the no-map and reusable properties must not - be set, so the operating system can create a virtual mapping - that will be used for synchronization. The main purpose for - restricted DMA is to mitigate the lack of DMA access control - on systems without an IOMMU, which could result in the DMA - accessing the system memory at unexpected times and/or - unexpected addresses, possibly leading to data leakage or - corruption. The feature on its own provides a basic level of - protection against the DMA overwriting buffer contents at - unexpected times. However, to protect against general data - leakage and system memory corruption, the system needs to - provide way to lock down the memory access, e.g., MPU. Note - that since coherent allocation needs remapping, one must set - up another device coherent pool by shared-dma-pool and use - dma_alloc_from_dev_coherent instead for atomic coherent - allocation. - - linux,cma-default: - type: boolean - description: > - If this property is present, then Linux will use the region for - the default pool of the contiguous memory allocator. - - linux,dma-default: - type: boolean - description: > - If this property is present, then Linux will use the region for - the default pool of the consistent DMA allocator. - -if: - properties: - compatible: - contains: - const: restricted-dma-pool -then: - properties: - no-map: false - reusable: false - -unevaluatedProperties: false - -examples: - - | - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* global autoconfigured region for contiguous allocations */ - linux,cma { - compatible = "shared-dma-pool"; - reusable; - size = <0x4000000>; - alignment = <0x2000>; - linux,cma-default; - }; - - display_reserved: framebuffer@78000000 { - reg = <0x78000000 0x800000>; - }; - - restricted_dma_reserved: restricted-dma-pool@50000000 { - compatible = "restricted-dma-pool"; - reg = <0x50000000 0x4000000>; - }; - }; - -... diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml index 90520f89208b..77af276ed2a2 100644 --- a/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml +++ b/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml @@ -29,7 +29,7 @@ properties: maxItems: 1 description: | Shared memory region for AFE memif. A "shared-dma-pool". - See ../reserved-memory/reserved-memory.yaml for details. + See dtschema reserved-memory/shared-dma-pool.yaml for details.
mediatek,topckgen: $ref: /schemas/types.yaml#/definitions/phandle