The patch
ASoC: dt-bindings: add dt bindings for adau1977 audio codec
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From d5a5dcd3f815c82e719fd6563f027673160f88e1 Mon Sep 17 00:00:00 2001
From: Alexandru Ardelean alexandru.ardelean@analog.com Date: Tue, 2 Oct 2018 15:06:30 +0300 Subject: [PATCH] ASoC: dt-bindings: add dt bindings for adau1977 audio codec
Add device-tree bindings documentation file for ADAU1977 audio codec. This describes device-tree fields that are already supported by the driver.
The driver supports both I2C AND and SPI, and this doc covers both aspects of the DT configuration.
Signed-off-by: Alexandru Ardelean alexandru.ardelean@analog.com Signed-off-by: Mark Brown broonie@kernel.org --- .../bindings/sound/adi,adau1977.txt | 54 +++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/adi,adau1977.txt
diff --git a/Documentation/devicetree/bindings/sound/adi,adau1977.txt b/Documentation/devicetree/bindings/sound/adi,adau1977.txt new file mode 100644 index 000000000000..e79aeef73f28 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,adau1977.txt @@ -0,0 +1,54 @@ +Analog Devices ADAU1977/ADAU1978/ADAU1979 + +Datasheets: +http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1977.... +http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1978.... +http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1979.... + +This driver supports both the I2C and SPI bus. + +Required properties: + - compatible: Should contain one of the following: + "adi,adau1977" + "adi,adau1978" + "adi,adau1979" + + - AVDD-supply: analog power supply for the device, please consult + Documentation/devicetree/bindings/regulator/regulator.txt + +Optional properties: + - reset-gpio: the reset pin for the chip, for more details consult + Documentation/devicetree/bindings/gpio/gpio.txt + + - DVDD-supply: supply voltage for the digital core, please consult + Documentation/devicetree/bindings/regulator/regulator.txt + +For required properties on SPI, please consult +Documentation/devicetree/bindings/spi/spi-bus.txt + +Required properties on I2C: + + - reg: The i2c address. Value depends on the state of ADDR0 + and ADDR1, as wired in hardware. + +Examples: + + adau1977_spi: adau1977@0 { + compatible = "adi,adau1977"; + spi-max-frequency = <600000>; + + AVDD-supply = <®ulator>; + DVDD-supply = <®ulator_digital>; + + reset_gpio = <&gpio 10 GPIO_ACTIVE_LOW>; + }; + + adau1977_i2c: adau1977@11 { + compatible = "adi,adau1977"; + reg = <0x11>; + + AVDD-supply = <®ulator>; + DVDD-supply = <®ulator_digital>; + + reset_gpio = <&gpio 10 GPIO_ACTIVE_LOW>; + };