Hi,Takashi:
[FYI] The reporter of the 0003427 helped to test the patch. Here is the result: 1. 6-channel mode is okay 2. Mic is okay 3. If switch the mic to output jack, it can mute the internal speaker.
Thanks!
Jiang,zhe
-----Original Message----- From: Jiang, Zhe Sent: 2007年11月9日 12:54 To: Takashi Iwai Cc: alsa-devel@alsa-project.org Subject: Re: [alsa-devel] patch for Dell 1210 which using stac9221 codec
On Thu, 2007-11-08 at 05:48 +0100, Takashi Iwai wrote:
At Thu, 08 Nov 2007 15:06:22 +0800, zhejiang wrote:
Hi,Takashi:
Is there any new states about this patch? Maybe I can ask the reporter to help to test it.
Your patch looks almost fine, but I need your sign-off to merge to the upstream (as it's no trivial fix). Give the following explicitly to agree the general patch management (see $LINUX_KERNEL/Documentation/SubmittingPatches for details).
Thanks! Here is my sign-off:
Signed-off-by: Jiang Zhe zhe.jiang@intel.com
So far, three patches are pending:
- fix for pincfg
- hack to swap hp and line-outs at probe
- fix for speaker-off via mic-jack plug (which I'd need a bit more review, though)
Of course, the test of the patch with the original reporter is important.
I will ask the reporter to help to test the patch.
thanks,
Takashi
Thanks!
On Wed, 2007-10-31 at 16:39 +0800, Takashi Iwai wrote:
At Wed, 31 Oct 2007 16:49:44 +0800, zhejiang wrote:
On Tue, 2007-10-30 at 14:53 +0100, Takashi Iwai wrote:
At Tue, 30 Oct 2007 17:05:55 +0800, zhejiang wrote:
The stac92xx_auto_create_multi_out_ctls() create controls
according to
cfg->line_outs. This patch seems to leave the cfg->line_outs
unchanged.
It will be 1 . So I think that we need to modify stac92xx_auto_create_multi_out_ctls(),let it to use the right
line_outs.
Right, then it might be actually easier to swap line_outs and
hp_outs
before and after as you suggested...
Takashi
So,we should patch the patch_sigmatel.c like that?
Yes, that's what I meant (almost same change I did in my local tree :) I'm going to split this to two pieces, the change of m82 pin config and the hack for multi-HP outs (also my last change to autocfg parser).
Anyway, could you give your sign-off? Then I'll apply the patches to the HG tree for better testing.
Thanks,
Takashi
Thanks!
diff -Nur
a/alsa-driver-hg20071031/alsa-kernel/pci/hda/patch_sigmatel.c
b/alsa-driver-hg20071031/alsa-kernel/pci/hda/patch_sigmatel.c --- a/alsa-driver-hg20071031/alsa-kernel/pci/hda/patch_sigmatel.c 2007-10-23 08:00:10.000000000 +0800 +++ b/alsa-driver-hg20071031/alsa-kernel/pci/hda/patch_sigmatel.c 2007-10-31 16:15:38.000000000 +0800 @@ -884,8 +884,8 @@ 102801D7 (Dell XPS M1210) */ static unsigned int dell_922x_m82_pin_configs[10] = {
0x0221121f, 0x408103ff, 0x02111212, 0x90100310,0x408003f1, 0x02111211, 0x03451340, 0x40c003f2,
0x02211211, 0x408103ff, 0x02a1123e, 0x90100310,0x408003f1, 0x0221121f, 0x03451340, 0x40c003f2, 0x508003f3, 0x405003f4,};
@@ -2088,6 +2088,7 @@ { struct sigmatel_spec *spec = codec->spec; int err;
int hp_speaker_swap = 0; if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,@@ -2096,6 +2097,18 @@ if (! spec->autocfg.line_outs) return 0; /* can't find valid pin config */
if (spec->autocfg.line_out_type == AUTO_PIN_SPEAKER_OUT &&spec->autocfg.hp_outs > 1) {/*Copy hp_outs to line_outs, backup line_outs inspeaker_outs*/
memcpy(spec->autocfg.speaker_pins,spec->autocfg.line_out_pins,
sizeof(spec->autocfg.line_out_pins));spec->autocfg.speaker_outs = spec->autocfg.line_outs;memcpy(spec->autocfg.line_out_pins,spec->autocfg.hp_pins,
sizeof(spec->autocfg.hp_pins));spec->autocfg.line_outs = spec->autocfg.hp_outs;hp_speaker_swap = 1;}if ((err = stac92xx_add_dyn_out_pins(codec, &spec->autocfg)) <
return err; if (spec->multiout.num_dacs == 0)@@ -2107,6 +2120,18 @@ if (err < 0) return err;
if (hp_speaker_swap == 1) {/*Restore the hp_outs and line_outs*/memcpy(spec->autocfg.hp_pins,spec->autocfg.line_out_pins,
sizeof(spec->autocfg.line_out_pins));spec->autocfg.hp_outs = spec->autocfg.line_outs;memcpy(spec->autocfg.line_out_pins,spec->autocfg.speaker_pins,
sizeof(spec->autocfg.speaker_pins));spec->autocfg.line_outs = spec->autocfg.speaker_outs;memset(spec->autocfg.speaker_pins, 0,sizeof(spec->autocfg.speaker_pins));
spec->autocfg.speaker_outs = 0;}err = stac92xx_auto_create_hp_ctls(codec, &spec->autocfg); if (err < 0)