Hello Geert,
On Mon, Jan 17, 2022 at 09:41:42AM +0100, Geert Uytterhoeven wrote:
On Sat, Jan 15, 2022 at 9:22 PM Sergey Shtylyov s.shtylyov@omp.ru wrote:
On 1/14/22 11:22 PM, Uwe Kleine-König wrote:
You have to understand that for clk (and regulator and gpiod) NULL is a valid descriptor that can actually be used, it just has no effect. So this is a convenience value for the case "If the clk/regulator/gpiod in question isn't available, there is nothing to do". This is what makes clk_get_optional() and the others really useful and justifies their existence. This doesn't apply to platform_get_irq_optional().
I do understand that. However, IRQs are a different beast with their own justifications...
clk_get_optional() is sane and sensible for cases where the clk might be absent and it helps you because you don't have to differentiate between "not found" and "there is an actual resource".
The reason for platform_get_irq_optional()'s existence is just that platform_get_irq() emits an error message which is wrong or suboptimal
I think you are very wrong here. The real reason is to simplify the callers.
Indeed.
The commit that introduced platform_get_irq_optional() said:
Introduce a new platform_get_irq_optional() that works much like platform_get_irq() but does not output an error on failure to find the interrupt.
So the author of 8973ea47901c81a1912bd05f1577bed9b5b52506 failed to mention the real reason? Or look at 31a8d8fa84c51d3ab00bf059158d5de6178cf890:
[...] use platform_get_irq_optional() to get second/third IRQ which are optional to avoid below error message during probe: [...]
Look through the output of
git log -Splatform_get_irq_optional
to find several more of these.
Also I fail to see how a caller of (today's) platform_get_irq_optional() is simpler than a caller of platform_get_irq() given that there is no semantic difference between the two. Please show me a single conversion from platform_get_irq to platform_get_irq_optional that yielded a simplification.
So you need some more effort to convince me of your POV.
Even for clocks, you cannot assume that you can always blindly use the returned dummy (actually a NULL pointer) to call into the clk API. While this works fine for simple use cases, where you just want to enable/disable an optional clock (clk_prepare_enable() and clk_disable_unprepare()), it does not work for more complex use cases.
Agreed. But for clks and gpiods and regulators the simple case is quite usual. For irqs it isn't.
And if you cannot blindly use the dummy, then you're not the targetted caller of *_get_optional() and should better use *_get() and handle -ENODEV explicitly.
Best regards Uwe