Hi Heiko,
On 18/02/2020 9:32 pm, Robin Murphy wrote:
Add explicit properties to describe existing boards' GPIO_MUTE usage for the analog codec.
Are you happy to pick this up now that the driver patches are queued?
Thanks, Robin.
Signed-off-by: Robin Murphy robin.murphy@arm.com
v2: no change
arch/arm64/boot/dts/rockchip/rk3328-a1.dts | 1 + arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 1 + 2 files changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts index 16f1656d5203..797e90a3ac92 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts @@ -60,6 +60,7 @@ };
&codec {
- mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>; status = "okay"; };
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index 62936b432f9a..bf3e546f5266 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -104,6 +104,7 @@ };
&codec {
mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>; status = "okay";
port@0 {