On Fri, Nov 06, 2015 at 06:22:43PM -0800, Simran Rai wrote:
Add bindings for audio driver in Broadcom Cygnus.
Signed-off-by: Lori Hikichi lhikichi@broadcom.com Signed-off-by: Simran Rai ssimran@broadcom.com Reviewed-by: Ray Jui rjui@broadcom.com Reviewed-by: Scott Branden sbranden@broadcom.com
Acked-by: Rob Herring robh@kernel.org
.../bindings/sound/brcm,cygnus-audio.txt | 54 ++++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt
diff --git a/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt new file mode 100644 index 0000000..3c06001 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt @@ -0,0 +1,54 @@ +BROADCOM Cygnus Audio I2S/TDM/SPDIF controller
+Required properties:
- compatible : "brcm,cygnus-audio"
- #address-cells: 32bit valued, 1 cell.
- #size-cells: 32bit valued, 0 cell.
- reg : Should contain audio registers location and length
- reg-names: names of the registers listed in "reg" property
Valid names are "aud" and "i2s_in". "aud" contains a
set of DMA, I2S_OUT and SPDIF registers. "i2s_in" contains
a set of I2S_IN registers.
- clocks: PLL and leaf clocks used by audio ports
- clock-names: names of 3 leaf clocks used by audio ports
Valid names are "ch0_audio", "ch1_audio", "ch2_audio"
- interrupts: audio DMA interrupt number
+SSP Subnode properties: +- reg: The index of ssp port interface to use
- Valid value are 0, 1, 2, or 3 (for spdif)
+Example:
- cygnus_audio: audio@180ae000 {
compatible = "brcm,cygnus-audio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x180ae000 0xafd>, <0x180aec00 0x1f8>;
reg-names = "aud", "i2s_in";
clocks = <&audiopll BCM_CYGNUS_AUDIOPLL_CH0>,
<&audiopll BCM_CYGNUS_AUDIOPLL_CH1>,
<&audiopll BCM_CYGNUS_AUDIOPLL_CH2>;
clock-names = "ch0_audio", "ch1_audio", "ch2_audio";
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
ssp0: ssp_port@0 {
reg = <0>;
status = "okay";
};
ssp1: ssp_port@1 {
reg = <1>;
status = "disabled";
};
ssp2: ssp_port@2 {
reg = <2>;
status = "disabled";
};
spdif: spdif_port@3 {
reg = <3>;
status = "disabled";
};
- };
-- 1.7.9.5