Hi there,
With a sampling rate of 8000 I want to capture every 20ms a chunk (160 frames) of data from the soundcard. That works ok, but every ~5 seconds I get a EGAIN from snd_pcm_readi(). I understand that this is not an error but a notification that the sound card is not ready and should be asked again for data later on.
Probably the easiest way to get rid of the EGAINs would be to use blocking IO, which I would prefer, but I have timing restrictions and snd_pcm_readi() has no sort of timeout (which I could see at least).
Additional Information: The reason for me the read from the sound card every 20ms is, that I need to do so for my voip-app (rtp&sip) which needs to send 160 frames every 20ms. The calculation is: PacketsPerSecond=50 SampleRate=8000 FramesPerPacket=8000/50=160 Wait=1000ms/50=20ms
I know that EAGAINs might occur and I'm confident that I handle them ok on the RTP-Level (which is to notify the other side which then plays empty samples). Still I would guess, that I could receive much less EGAINs if I would setup the sound card better. If played around with the period time and size and buffer time and size, but honestly I did not really get the point of them and try&error has not helped me either.
Thanks in advance & greetings from Germany
Johannes