From: Bard Liao yung-chuan.liao@linux.intel.com
Currently, we use the same channel mask for aggregated speakers. It works fine for playback because we duplicate the audio data for all aggregated speakers. But we need to get audio data from each aggregated speaker and combine them to the captured audio. So we need to set non-overlapping channel mask for aggregated ALH DAIs.
Signed-off-by: Bard Liao yung-chuan.liao@linux.intel.com Reviewed-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Péter Ujfalusi peter.ujfalusi@linux.intel.com Signed-off-by: Peter Ujfalusi peter.ujfalusi@linux.intel.com --- sound/soc/sof/ipc4-topology.c | 26 ++++++++++++++++++++++++-- 1 file changed, 24 insertions(+), 2 deletions(-)
diff --git a/sound/soc/sof/ipc4-topology.c b/sound/soc/sof/ipc4-topology.c index 59f4d42f9011..34586cbb461f 100644 --- a/sound/soc/sof/ipc4-topology.c +++ b/sound/soc/sof/ipc4-topology.c @@ -1203,8 +1203,11 @@ sof_ipc4_prepare_copier_module(struct snd_sof_widget *swidget, struct sof_ipc4_copier_data *alh_data; struct sof_ipc4_copier *alh_copier; struct snd_sof_widget *w; + u32 ch_count = 0; u32 ch_mask = 0; u32 ch_map; + u32 step; + u32 mask; int i;
blob = (struct sof_ipc4_alh_configuration_blob *)ipc4_copier->copier_config; @@ -1214,11 +1217,15 @@ sof_ipc4_prepare_copier_module(struct snd_sof_widget *swidget, /* Get channel_mask from ch_map */ ch_map = copier_data->base_config.audio_fmt.ch_map; for (i = 0; ch_map; i++) { - if ((ch_map & 0xf) != 0xf) + if ((ch_map & 0xf) != 0xf) { ch_mask |= BIT(i); + ch_count++; + } ch_map >>= 4; }
+ step = ch_count / blob->alh_cfg.count; + mask = GENMASK(step - 1, 0); /* * Set each gtw_cfg.node_id to blob->alh_cfg.mapping[] * for all widgets with the same stream name @@ -1233,7 +1240,22 @@ sof_ipc4_prepare_copier_module(struct snd_sof_widget *swidget, alh_copier = (struct sof_ipc4_copier *)dai->private; alh_data = &alh_copier->data; blob->alh_cfg.mapping[i].alh_id = alh_data->gtw_cfg.node_id; - blob->alh_cfg.mapping[i].channel_mask = ch_mask; + /* + * Set the same channel mask for playback as the audio data is + * duplicated for all speakers. For capture, split the channels + * among the aggregated DAIs. For example, with 4 channels on 2 + * aggregated DAIs, the channel_mask should be 0x3 and 0xc for the + * two DAI's. + * The channel masks used depend on the cpu_dais used in the + * dailink at the machine driver level, which actually comes from + * the tables in soc_acpi files depending on the _ADR and devID + * registers for each codec. + */ + if (w->id == snd_soc_dapm_dai_in) + blob->alh_cfg.mapping[i].channel_mask = ch_mask; + else + blob->alh_cfg.mapping[i].channel_mask = mask << (step * i); + i++; } if (blob->alh_cfg.count > 1) {