On 30 July 2016 at 17:17, Maxime Ripard maxime.ripard@free-electrons.com wrote:
On Sat, Jul 30, 2016 at 04:27:15PM +0200, codekipper@gmail.com wrote:
From: Marcus Cooper codekipper@gmail.com
The A31 SoC uses the same SPDIF block as found in earlier SoCs, but its reset is controlled via a separate reset controller.
Signed-off-by: Marcus Cooper codekipper@gmail.com
Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt index 13503aa..4fe80f7 100644 --- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt +++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt @@ -9,6 +9,7 @@ Required properties:
- compatible : should be one of the following:
- "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
"allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
reg : Offset and length of the register set for the device.
@@ -25,6 +26,8 @@ Required properties: "apb" clock for the spdif bus. "spdif" clock for spdif controller.
- reset : reset specifier for the ahb reset (A31 and newer only)
Isn't it resets ? (plural)
Dohh..yes it is. Do you want me to send an updated patch series, a single patch change or could I beg for your commit massaging? Thanks, CK
Thanks, Maxime
-- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com