From: Shuming Fan shumingf@realtek.com
There is a pop noise at the beginning of the capture data. This patch adds the delay time before stereo1 ADC unmute to fix the pop sound issue.
Signed-off-by: Shuming Fan shumingf@realtek.com --- include/sound/rt5682s.h | 1 + sound/soc/codecs/rt5682s.c | 34 +++++++++++++++++++++++++++++++--- 2 files changed, 32 insertions(+), 3 deletions(-)
diff --git a/include/sound/rt5682s.h b/include/sound/rt5682s.h index accfbc2dcdd2..f18d91308b9a 100644 --- a/include/sound/rt5682s.h +++ b/include/sound/rt5682s.h @@ -40,6 +40,7 @@ struct rt5682s_platform_data { enum rt5682s_jd_src jd_src; unsigned int dmic_clk_rate; unsigned int dmic_delay; + unsigned int amic_delay; bool dmic_clk_driving_high;
const char *dai_clk_names[RT5682S_DAI_NUM_CLKS]; diff --git a/sound/soc/codecs/rt5682s.c b/sound/soc/codecs/rt5682s.c index d49a4f68566d..efa1016831dd 100644 --- a/sound/soc/codecs/rt5682s.c +++ b/sound/soc/codecs/rt5682s.c @@ -1367,6 +1367,31 @@ static int rt5682s_hp_amp_event(struct snd_soc_dapm_widget *w, return 0; }
+static int rt5682s_stereo1_adc_mixl_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct rt5682s_priv *rt5682s = snd_soc_component_get_drvdata(component); + unsigned int delay = 0; + + if (rt5682s->pdata.amic_delay) + delay = rt5682s->pdata.amic_delay; + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + msleep(delay); + snd_soc_component_update_bits(component, RT5682S_STO1_ADC_DIG_VOL, + RT5682S_L_MUTE, 0); + break; + case SND_SOC_DAPM_PRE_PMD: + snd_soc_component_update_bits(component, RT5682S_STO1_ADC_DIG_VOL, + RT5682S_L_MUTE, RT5682S_L_MUTE); + break; + } + + return 0; +} + static int sar_power_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { @@ -1680,9 +1705,10 @@ static const struct snd_soc_dapm_widget rt5682s_dapm_widgets[] = { /* ADC Mixer */ SND_SOC_DAPM_SUPPLY("ADC Stereo1 Filter", RT5682S_PWR_DIG_2, RT5682S_PWR_ADC_S1F_BIT, 0, set_filter_clk, SND_SOC_DAPM_PRE_PMU), - SND_SOC_DAPM_MIXER("Stereo1 ADC MIXL", RT5682S_STO1_ADC_DIG_VOL, - RT5682S_L_MUTE_SFT, 1, rt5682s_sto1_adc_l_mix, - ARRAY_SIZE(rt5682s_sto1_adc_l_mix)), + SND_SOC_DAPM_MIXER_E("Stereo1 ADC MIXL", SND_SOC_NOPM, 0, 0, + rt5682s_sto1_adc_l_mix, ARRAY_SIZE(rt5682s_sto1_adc_l_mix), + rt5682s_stereo1_adc_mixl_event, + SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU), SND_SOC_DAPM_MIXER("Stereo1 ADC MIXR", RT5682S_STO1_ADC_DIG_VOL, RT5682S_R_MUTE_SFT, 1, rt5682s_sto1_adc_r_mix, ARRAY_SIZE(rt5682s_sto1_adc_r_mix)), @@ -2885,6 +2911,8 @@ static int rt5682s_parse_dt(struct rt5682s_priv *rt5682s, struct device *dev) &rt5682s->pdata.dmic_clk_rate); device_property_read_u32(dev, "realtek,dmic-delay-ms", &rt5682s->pdata.dmic_delay); + device_property_read_u32(dev, "realtek,amic-delay-ms", + &rt5682s->pdata.amic_delay);
rt5682s->pdata.ldo1_en = of_get_named_gpio(dev->of_node, "realtek,ldo1-en-gpios", 0);