At Thu, 31 Oct 2013 18:31:51 -0400, mengdong.lin@intel.com wrote:
From: Mengdong Lin mengdong.lin@intel.com
For Valleyview display codec, if an unused pin chooses an assgined converter selected by a used pin, playback on the unused pin can also give sound to the output device of the used pin. It's because data flows from the same convertor to the display port of the used pin. This issue is same as Haswell.
So this patch avoids using assinged convertors for unused pins. The related function haswell_config_cvts() is renamed for code reuse.
Signed-off-by: Mengdong Lin mengdong.lin@intel.com
Thanks, applied.
Takashi
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index e332db8..bcf764f 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -45,6 +45,7 @@ module_param(static_hdmi_pcm, bool, 0644); MODULE_PARM_DESC(static_hdmi_pcm, "Don't restrict PCM parameters per ELD info");
#define is_haswell(codec) ((codec)->vendor_id == 0x80862807) +#define is_valleyview(codec) ((codec)->vendor_id == 0x80862882)
struct hdmi_spec_per_cvt { hda_nid_t cvt_nid; @@ -1148,7 +1149,7 @@ static int hdmi_choose_cvt(struct hda_codec *codec, return 0; }
-static void haswell_config_cvts(struct hda_codec *codec, +static void not_share_unassigned_cvt(struct hda_codec *codec, hda_nid_t pin_nid, int mux_idx) { struct hdmi_spec *spec = codec->spec; @@ -1226,8 +1227,8 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo, mux_idx);
/* configure unused pins to choose other converters */
- if (is_haswell(codec))
haswell_config_cvts(codec, per_pin->pin_nid, mux_idx);
if (is_haswell(codec) || is_valleyview(codec))
not_share_unassigned_cvt(codec, per_pin->pin_nid, mux_idx);snd_hda_spdif_ctls_assign(codec, pin_idx, per_cvt->cvt_nid);
-- 1.8.1.2