This patch adds support to block pack mode, which is required on Qcom soundwire controllers v1.5.x on few ports!
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org --- drivers/soundwire/qcom.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index 0036d3248fb4..5a61d82310fd 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -54,6 +54,7 @@ #define SWRM_MCP_SLV_STATUS 0x1090 #define SWRM_MCP_SLV_STATUS_MASK GENMASK(1, 0) #define SWRM_DP_PORT_CTRL_BANK(n, m) (0x1124 + 0x100 * (n - 1) + 0x40 * m) +#define SWRM_DP_BLOCK_CTRL3_BANK(n, m) (0x1138 + 0x100 * (n - 1) + 0x40 * m) #define SWRM_DP_PORT_CTRL_EN_CHAN_SHFT 0x18 #define SWRM_DP_PORT_CTRL_OFFSET2_SHFT 0x10 #define SWRM_DP_PORT_CTRL_OFFSET1_SHFT 0x08 @@ -82,6 +83,7 @@ struct qcom_swrm_port_config { u8 si; u8 off1; u8 off2; + u8 bp_mode; };
struct qcom_swrm_ctrl { @@ -392,14 +394,22 @@ static int qcom_swrm_transport_params(struct sdw_bus *bus, { struct qcom_swrm_ctrl *ctrl = to_qcom_sdw(bus); u32 value; + int reg = SWRM_DP_PORT_CTRL_BANK((params->port_num), bank); + int ret;
value = params->offset1 << SWRM_DP_PORT_CTRL_OFFSET1_SHFT; value |= params->offset2 << SWRM_DP_PORT_CTRL_OFFSET2_SHFT; value |= params->sample_interval - 1;
- return ctrl->reg_write(ctrl, - SWRM_DP_PORT_CTRL_BANK((params->port_num), bank), - value); + ret = ctrl->reg_write(ctrl, reg, value); + + if (!ret && params->blk_pkg_mode) { + reg = SWRM_DP_BLOCK_CTRL3_BANK(params->port_num, bank); + + ret = ctrl->reg_write(ctrl, reg, 1); + } + + return ret; }
static int qcom_swrm_port_enable(struct sdw_bus *bus, @@ -447,6 +457,7 @@ static int qcom_swrm_compute_params(struct sdw_bus *bus) p_rt->transport_params.sample_interval = pcfg->si + 1; p_rt->transport_params.offset1 = pcfg->off1; p_rt->transport_params.offset2 = pcfg->off2; + p_rt->transport_params.blk_pkg_mode = pcfg->bp_mode; }
list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) { @@ -457,6 +468,7 @@ static int qcom_swrm_compute_params(struct sdw_bus *bus) pcfg->si + 1; p_rt->transport_params.offset1 = pcfg->off1; p_rt->transport_params.offset2 = pcfg->off2; + p_rt->transport_params.blk_pkg_mode = pcfg->bp_mode; i++; } } @@ -703,6 +715,7 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl) u8 off1[QCOM_SDW_MAX_PORTS]; u8 off2[QCOM_SDW_MAX_PORTS]; u8 si[QCOM_SDW_MAX_PORTS]; + u8 bp_mode[QCOM_SDW_MAX_PORTS] = { 0, }; int i, ret, nports, val;
ctrl->reg_read(ctrl, SWRM_COMP_PARAMS, &val); @@ -745,10 +758,13 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl) if (ret) return ret;
+ ret = of_property_read_u8_array(np, "qcom,ports-block-pack-mode", + bp_mode, nports); for (i = 0; i < nports; i++) { ctrl->pconfig[i].si = si[i]; ctrl->pconfig[i].off1 = off1[i]; ctrl->pconfig[i].off2 = off2[i]; + ctrl->pconfig[i].bp_mode = bp_mode[i]; }
return 0;